m
m
Line 19: Line 19:
 
*Biofiltration with liner: [[File:Bioretention with Liner.pdf]]
 
*Biofiltration with liner: [[File:Bioretention with Liner.pdf]]
 
*General plan: [[File:Bioretention CADD Details GEN PLAN (1).pdf]]
 
*General plan: [[File:Bioretention CADD Details GEN PLAN (1).pdf]]
 +
<!--
 +
Old Manual files
 
*Infiltration filtration recharge: [[File:Bioretention CADD Details infil-filtration-recharge (1).pdf]]
 
*Infiltration filtration recharge: [[File:Bioretention CADD Details infil-filtration-recharge (1).pdf]]
 
*Infiltration recharge: [[File:Bioretention CADD Details INFILTRATION RECHARGE FACILITY (1).pdf]]
 
*Infiltration recharge: [[File:Bioretention CADD Details INFILTRATION RECHARGE FACILITY (1).pdf]]
 
*Infiltration partial recharge: [[File:Bioretention CADD Details infiltration-partial recharge (1).pdf]]
 
*Infiltration partial recharge: [[File:Bioretention CADD Details infiltration-partial recharge (1).pdf]]
*Filtration: [[File:Bioretention CADD Details filtration -pollution (1).pdf]]
+
*Filtration: [[File:Bioretention CADD Details filtration -pollution (1).pdf]]-->
  
 
==Infiltration==
 
==Infiltration==

Revision as of 17:58, 1 April 2014

Bioretention

Infiltration

Warning: Note that the following diagram for an infiltration trench shows the depth of the trench exceeding the width. This would result in this BMP being classified as a Class V underground injection well. It is HIGHLY RECOMMENDED that the length of the trench be a minimum of two times the depth of the BMP.

Ponds

Sand filters

Swales