Difference between revisions of "Future updates"
m |
m |
||
| Line 5: | Line 5: | ||
===Stormwater credits and modeling=== | ===Stormwater credits and modeling=== | ||
(Summer, 2014) Updates include the following: | (Summer, 2014) Updates include the following: | ||
| − | *Updates to existing sections on modeling ([[Introduction to stormwater modeling]], [[Available stormwater models and selecting a model]], [[Detailed information on specific models]], [[What is the pre-development condition]]. | + | *Updates to existing sections on modeling ([[Introduction to stormwater modeling]], [[Available stormwater models and selecting a model]], [[Detailed information on specific models]], [[What is the pre-development condition]]). |
*A page discussing volume, TSS and phosphorus credits will be created for each structural BMP discussed in the Manual. | *A page discussing volume, TSS and phosphorus credits will be created for each structural BMP discussed in the Manual. | ||
Revision as of 14:55, 23 April 2014
Timelines shown below are approximate. We update this page infrequently.
Contents
Updates to the bioretention section
Work on this section has been on-going for several months. It is largely completed and available for review, but minor changes are anticipated as the final review proceeds. See What's New for recent updates to the Manual.
Stormwater credits and modeling
(Summer, 2014) Updates include the following:
- Updates to existing sections on modeling (Introduction to stormwater modeling, Available stormwater models and selecting a model, Detailed information on specific models, What is the pre-development condition).
- A page discussing volume, TSS and phosphorus credits will be created for each structural BMP discussed in the Manual.
TMDLs
(Summer. 2014) The following new information will incorporated into the Manual.
- Overview of TMDLs
- Summary of TMDL requirements in stormwater permits
- Forms and guidance for TMDLs
- Links for TMDLs
MIDS
(June, 2014). The following sections will be inluded and updated.
- Overview of Minimal Impact Design Standards (MIDS)
- Performance goals for new development, re-development and linear projects
- Flexible treatment options
- Ordinance goals
- MIDS calculator
- Training and workshop materials and modules
- Technical documents
Creation of a section on trees (urban forestry)
(May, 2014). Work on this section (see Trees) has been on-going for the past few months. Several pages have already been added, but the following information will be added in the near future:
- design specifications for tree quality and tree planting;
- construction design specifications for tree stormwater BMPs;
- guidelines for construction activities adjacent to existing trees;
- maintenance guidelines for trees;
- monitoring guidelines for tree BMPs; and
- a fact sheet summarizing the applicability of urban forestry to stormwater management and use of trees as urban stormwater BMP;
Updates for stormwater infiltration topics
(Spring/Summer 2014) A new section on stormwater infiltration will be added to the Manual and will include the following.
- basic concepts related to the infiltration of stormwater
- Best Management Practices that can be used for stormwater infiltration
- select monitoring studies that investigated groundwater quality impacts associated with stormwater infiltration
- a discussion of area-wide or regional groundwater quality or quantity impacts associated with stormwater infiltration
- stormwater pretreatment considerations for protecting shallow groundwater quality
- groundwater mounding considerations for infiltrated stormwater
- groundwater separation distances for infiltrated stormwater
- updates on stormwater infiltration constraints
- considerations for stormwater infiltration in Wellhead Protection Areas
- considerations and options for stormwater infiltration in areas with contaminated soils or contaminated groundwater