Infiltration

Information: We have created this new page called Infiltration, which includes information on infiltration trenches, infiltration basins, dry wells, and underground infiltration practices. This page and the accompanying pages shown below replace the Infiltration trench and Infiltration basin sections of the manual.

Photo of a Infiltration trench in Lino Lakes

Infiltration basins, infiltration trenches, dry wells, and underground infiltration systems capture and temporarily store stormwater before allowing it to infiltrate into the soil. As the stormwater penetrates the underlying soil, chemical, biological and physical processes remove pollutants and delay peak stormwater flows.

These four practices are grouped together because design, construction, operation, and maintenance guidelines and specifications are similar. Differences between these practices, where they exist, are highlighted on each of the following pages. For additional information on other infiltration practices, see Stormwater infiltration Best Management Practices and Bioretention terminology.

Infiltration articles

• Overview for infiltration
• Types of infiltration
• Design criteria for infiltration
• Construction specifications for infiltration
• Operation and maintenance of stormwater infiltration practices
• Assessing the performance of infiltration
• Calculating credits for infiltration
• Cost-benefit considerations for infiltration
• Case studies for infiltration
• External resources for infiltration
• References for infiltration
• Requirements, recommendations and information for using infiltration basin/underground infiltration BMPs in the MIDS calculator

Related pages

• Understanding and interpreting soils and soil boring reports for infiltration BMPs
• Determining soil infiltration rates
• Cold climate considerations for infiltration practices - See [1], [2]