Guidance for meeting chloride TMDL MS4 permit requirements

Map of chloride impairments in Minnesota. For more details on the map click here.

Map of chloride impairments in the metro area. For more details on the map click here.

This page provides guidance for MS4 (Municipal Separate Storm Sewer System) permittees who have permit requirements for chloride total maximum daily load wasteload allocations.

Chloride Total Maximum Daily Loads (TMDLs)

There are currently 40 lakes and streams in the Twin Cities Metro Area that are impaired by chloride. There are an additional 10 lakes and streams that are impaired by chloride in greater Minnesota. See the MPCA’s chloride webpage for more information on the sources of chloride, environmental impacts, and opportunities for your community to reduce salt.

The EPA has approved 40 total maximum daily loads (TMDLs) that include MS4 (Municipal Separate Storm Sewer System) wasteload allocation (WLAs) for chloride. Click here to link to MPCA's impaired waters website. A map illustrating U.S. EPA-approved listings for chloride is shown on the right. The TMDLs were developed as part of the Twin Cities Area Metro Chloride TMDL, Ninemile Creek TMDL, and the Shingle Creek TMDL. See the statewide chloride resources page for more information.

Permit requirements

The MS4 permit contains the following requirements for permittees that have an applicable wasteload allocation (WLA) for chloride.

1. Permit item 22.5: If the permittee has an applicable WLA for chloride, the permittee must document the amount of deicer applied each winter maintenance season to all permittee owned/operated surfaces
2. Permit item 22.6: If the permittee has an applicable WLA for chloride, each calendar year the permittee must conduct an assessment of the permittee's winter maintenance operations to reduce the amount of deicing salt applied to permittee owned/operated surfaces and determine current and future opportunities to improve best management practices (BMPs). The permittee may use the Agency’s Smart Salting Assessment Tool or other available resources and methods to complete this assessment.

The permittee must document the assessment. The assessment may include, but is not limited to:

a. operational changes such as pre-wetting, pre-treating the salt stockpile, increasing plowing prior to deicing, monitoring of road surface temperature, etc.;

b. implementation of new or modified equipment providing pre-wetting, or other capability for minimizing salt use;

c. regular calibration of equipment;

d. optimizing mechanical removal to reduce use of deicers; or

e. designation of no salt and/or low salt zones.

Guidance for meeting chloride TMDL permit requirements

Although the permit allows flexibility for permittees in documenting actions for meeting chloride TMDL requirements, several tools have been created to assist permittees in meeting requirements. These recommended resources are described below.

Document the amount of deicer applied

Screenshot of anti-icing form from the Winter Parking Lot and Sidewalk Manual.

Screenshot of deicing form from the Winter Parking Lot and Sidewalk Manual.

Permit item 22.5 - If the permittee has an applicable WLA for chloride, the permittee must document the amount of deicer applied each winter maintenance season to all permittee owned/operated surfaces

Permittees are required to track the amount of deicer applied. For each application event, permittees should also consider tracking the following.

• material used (e.g. sodium chloride, calcium chloride, etc.)
• location where material was applied
• date
• air temperature
• pavement temperature
• relative humidity (RH)
• dew point
• cloud cover
• operator
• event start
• event end
• event type (e.g. snow, rain, both)
• total precipitation, and
• application rate.

The Minnesota Snow and Ice Control Field Handbook for Snowplow Operators includes examples of salt tracking forms that could be used (see Appendix). The Winter Parking Lot and Sidewalk Manual also includes tracking forms for anti-icing and de-icing (see adjacent images).

These documents and the two tables may be accessed as Word documents at the following links.

• Minnesota Snow and Ice Control Field Handbook for Snowplow Operators: File:Snowice.docx
• Anti-icing Route Data Form: File:Anti-icing Route Data Form.docx
• Winter Parking Lot and Sidewalk Manual: File:Sidewalk maintenance.docx; wiki access
• Deicing Data Form: File:Deicing Data Form.docx

Annually conduct an assessment of the permittee’s winter maintenance operations

Permit item 22.6 - If the permittee has an applicable WLA for chloride, each calendar year the permittee must conduct an assessment of the permittee's winter maintenance operations to reduce the amount of deicing salt applied to permittee owned/operated surfaces and determine current and future opportunities to improve best management practices (BMPs). The permittee may use the Agency’s Smart Salting Assessment Tool or other available resources and methods to complete this assessment.

"The permittee must document the assessment. The assessment may include, but is not limited to:

a. operational changes such as pre-wetting, pre-treating the salt stockpile, increasing plowing prior to deicing, monitoring of road surface temperature, etc.;

b. implementation of new or modified equipment providing pre-wetting, or other capability for minimizing salt use;

c. regular calibration of equipment;

d. optimizing mechanical removal to reduce use of deicers; or

e. designation of no salt and/or low salt zones.'

To meet this permit requirement, the MPCA recommends using the Smart Salting Assessment Tool (SSAt). The SSAt has been developed as a resource of all known current salt saving BMPs. The SSAt is a free, web‐based tool that can be used to assist public and private winter maintenance organizations in determining where opportunities exist to improve practices, make reductions in salt use and track progress. The SSAt creates a number of reports based on the data you provide describing your past, current, and future operations. These reports can be submitted to the MPCA to meet this permit requirement (Section 22.6).

Below is a hypothetical example of an assessment that was completed with the SSAt and the various reports generated by the tool. The hypothetical example includes an assessment of current and future operations for low and high speed roads.

SSAt login page screenshot. Click here for main page of SSAt

.

BMP high-level overview report: overview of winter maintenance operations best management practices

The chart below is based on a completed Winter Maintenance Best Management Practices (BMP) assessment. The assessment consists of a series of multiple choice questions that cover all aspects of winter maintenance operations, such as policy, storage, application, and education. Each answer for a question is classified as an Advanced Best Practice (green), Average Best Practice (yellow), or Below Average Practice (red).

Graph from the Smart Salting Assessment Tool showing different levels of BMPs.

BMP summary report

The BMP Summary Report indicates how many different types of practices (advanced, best, poor, not applicable) practices you are currently implementing and how many you plan to implement in the future.

Summary table from the Smart Salting Assessment Tool showing different types of BMPs.

BMP list for current (2018-2019)

This report provides detailed information on current practices. This report could be used to help you prioritize what poor practices you want to work on improving in the coming years. Below is an excerpt from the report. The actual report includes responses to questions for all BMPs that are included in the tool.

Screen shot of the current years BMP list from the Smart Salting Assessment Tool.

Related pages

To link to other pages providing information and guidance on TMDLS, click here