m |
m |
||
(6 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | <Font size=3>'''Concentrations of contaminants found in stormwater. | + | <Font size=3>'''Concentrations of contaminants found in stormwater. Source: [https://bmpdatabase.org/ International Stormwater Database]<sup>7</sup>. Because the data below are from a single source, values may differ from those contained on [https://stormwater.pca.state.mn.us/index.php?title=Stormwater_event_mean_concentrations_and_pollutant_loading/export_rates_for_different_land_uses this page]. We recommend if you are using emcs to quantify pollutant loading, you use [https://stormwater.pca.state.mn.us/index.php?title=Stormwater_event_mean_concentrations_and_pollutant_loading/export_rates_for_different_land_uses this data] instead of data from this table. Note that the table does not include information for chloride, a common pollutant in stormwater. Chloride concentrations vary seasonally and would be misrepresented in a single table. For more information on chloride concentrations in stormwater, see [http://stormwater.pca.state.mn.us/index.php/Pollutant_fate_and_transport_in_stormwater_infiltration_systems#Chloride_in_stormwater here].'''</font size><br> |
Link to this [[Concentrations of contaminants found in stormwater|table]]. | Link to this [[Concentrations of contaminants found in stormwater|table]]. | ||
<table class="sortable"> | <table class="sortable"> | ||
Line 488: | Line 488: | ||
<td>1100</td> | <td>1100</td> | ||
<td>--</td> | <td>--</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td><font size=3>'''Rooftop'''</font size></td> | ||
+ | <td colspan=16>Water quality from rooftops varies with the type of roof. For more information see the section on [[Water quality considerations for stormwater and rainwater harvest and use/reuse]]</td> | ||
</tr> | </tr> | ||
</table> | </table> | ||
Line 493: | Line 497: | ||
<sup>1</sup> Concentrations are in milligrams per liter<br> | <sup>1</sup> Concentrations are in milligrams per liter<br> | ||
<sup>2</sup> Concentrations are in micrograms per liter<br> | <sup>2</sup> Concentrations are in micrograms per liter<br> | ||
− | <sup>3</sup> Concentrations are in<br> | + | <sup>3</sup> Concentrations are in Number per 100 milliliters<br> |
<sup>4</sup>Data is for trans-1,3-Dichloropropene and bromomethane<br> | <sup>4</sup>Data is for trans-1,3-Dichloropropene and bromomethane<br> | ||
<sup>5</sup> Data was selected from states with a similar climate to MN. The appropriate states were determined using Figure 1.3 from the [http://vermont4evolution.files.wordpress.com/2011/12/ulm-elc_coldclimates.pdf Stormwater BMP Design Supplement for Cold Climates] document.<BR> | <sup>5</sup> Data was selected from states with a similar climate to MN. The appropriate states were determined using Figure 1.3 from the [http://vermont4evolution.files.wordpress.com/2011/12/ulm-elc_coldclimates.pdf Stormwater BMP Design Supplement for Cold Climates] document.<BR> | ||
Line 503: | Line 507: | ||
<noinclude> | <noinclude> | ||
− | [[ | + | [[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Pollutant loading, concentrations, and characteristics]] |
</noinclude> | </noinclude> |
Concentrations of contaminants found in stormwater. Source: International Stormwater Database7. Because the data below are from a single source, values may differ from those contained on this page. We recommend if you are using emcs to quantify pollutant loading, you use this data instead of data from this table. Note that the table does not include information for chloride, a common pollutant in stormwater. Chloride concentrations vary seasonally and would be misrepresented in a single table. For more information on chloride concentrations in stormwater, see here.
Link to this table.
Land use | TSS 1 | NO2 + NO3 1 | TN 1 | TP 1 | Cu 2 | Zn 2 | Ni 2 | Cd 2 | Cr 2 | CN 2,5 | Oil and grease 2 | VOCs 2,5 | Pesticides 2,4,5 | FC 3,5 | EC 3,5 | FS 3,5 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Commercial | ||||||||||||||||
Number of sites | 56 | 50 | 13 | 56 | 60 | 62 | 40 | 51 | 38 | 2 | 44 | 4 | 1 | 4 | -- | 3 |
Number of observations | 857 | 786 | 77 | 948 | 785 | 867 | 291 | 543 | 294 | 6 | 394 | 160 | 6 | 19 | -- | 7 |
% of samples above detection | 98.7 | 98.9 | 97.4 | 94.5 | 85 | 99.2 | 51.5 | 38.1 | 52.0 | 0 | 65.5 | 65.5 | 0 | 73.7 | -- | 100 |
Minimum | <0.5 | <0.1 | <1.5 | <0.01 | <0.2 | <0.3 | <1 | <0.03 | <0.7 | n/a | <0.5 | <0.05 | n/a | <200 | -- | 310 |
Maximum | 2385 | 8.2 | 18.1 | 4.27 | 569.1 | 3050.5 | 110 | 80 | 100 | n/a | 359 | n/a | 28000 | -- | 24000 | |
Median | 52 | 0.6 | 1.75 | 0.2 | 17 | 110 | 8 | BDL6 | 4 | BDL | 5 | 0.7 | n/a | 450 | -- | 3100 |
Industrial | ||||||||||||||||
Number of sites | 58 | 51 | 13 | 57 | 65 | 67 | 43 | 60 | 42 | 2 | 48 | 3 | -- | 6 | -- | 4 |
Number of observations | 619 | 536 | 85 | 638 | 569 | 627 | 300 | 525 | 312 | 9 | 370 | 144 | -- | 32 | -- | 12 |
% samples above detection | 99.5 | 97.0 | 95.3 | 95.1 | 85.1 | 98.9 | 58.0 | 48.6 | 72.4 | 0 | 59.7 | 10.4 | -- | 90.6 | -- | 91.7 |
Minimum | <1 | <0.02 | <1.5 | <0.02 | <0.2 | <0.5 | <2 | <0.03 | <0.7 | n/a | <0.5 | <0.05 | -- | <1 | -- | <1 |
Maximum | 2490 | 8.4 | 15.2 | 7.9 | 1360 | 8100 | 120 | 334 | 150 | n/a | 408 | -- | 3600000 | -- | 48000 | |
Median | 75 | 0.68 | 1.7 | 0.23 | 19 | 155 | 10 | BDL | 10 | BDL | 5 | BDL | -- | 3950 | -- | 24000 |
Residential | ||||||||||||||||
Number of sites | 146 | 127 | 20 | 148 | 147 | 151 | 77 | 114 | 72 | -- | 95 | 7 | 1 | 10 | 3 | 4 |
Number of observations | 2257 | 1772 | 131 | 2380 | 1743 | 2013 | 418 | 1123 | 408 | -- | 694 | 210 | 6 | 94 | 19 | 23 |
% of sample above detection | 99.9 | 99.0 | 98.5 | 98.2 | 86.5 | 97.0 | 42.2 | 40.4 | 48.8 | -- | 56.8 | 20.1 | 0 | 85.9 | 100 | 95.7 |
Minimum | <0.5 | <0.03 | <1.5 | <0.01 | <0.2 | <0.5 | <0.5 | <0.03 | <0.7 | -- | <0.5 | <0.05 | n/a | <1 | 10 | <1 |
Maximum | 4168 | 66.4 | 18.3 | 19.90 | 590 | 14700 | 100 | 70 | 70 | -- | 419 | 3.42 | n/a | 5230000 | 35000 | 200000 |
Median | 58 | 0.60 | 2.24 | 0.26 | 11 | 69.9 | 5 | BDL | 3 | -- | 4 | BDL | BDL | 9400 | 1000 | 23500 |
Open space | ||||||||||||||||
Number of sites | 15 | 13 | 4 | 15 | 12 | 12 | 9 | 8 | 7 | 3 | 9 | 1 | -- | 2 | 1 | -- |
Number of observations | 105 | 109 | 13 | 111 | 44 | 49 | 38 | 41 | 36 | 13 | 26 | 5 | -- | 6 | 5 | -- |
% of samples above detection | 97.1 | 92.7 | 92.3 | 93.7 | 64.4 | 65.3 | 23.1 | 39.0 | 36.1 | 15.4 | 34.6 | 60.0 | -- | 100 | 100 | -- |
Minimum | <1 | <0.1 | <0.5 | <0.01 | <0.8 | <5 | <2 | <0.04 | <0.7 | <0.01 | <1 | <0.2 | -- | 1900 | 100 | -- |
Maximum | 4168 | 3.4 | 3.3 | 0.76 | 210 | 390 | 100 | 8 | 120 | 0.08 | 11 | 0.84 | -- | 63000 | 4700 | -- |
Median | 58 | 0.5 | 1.1 | 0.129 | 6 | 25 | BDL | BDL | BDL | BDL | BDL | 0.77 | -- | 2150 | 1100 | -- |
Rooftop | Water quality from rooftops varies with the type of roof. For more information see the section on Water quality considerations for stormwater and rainwater harvest and use/reuse |
TSS=total suspended solids, NO2=nitrite, NO3=nitrate, TN=total nitrogen, Cl=chloride, Cu=copper, Zn=zinc, Ni=nickel, Cd=cadmium, Cr=chromium, CN=cyanide, VOC=volatile organic compound, FC=fecal coliform, EC=E. coli, FS=fecal streptococci
1 Concentrations are in milligrams per liter
2 Concentrations are in micrograms per liter
3 Concentrations are in Number per 100 milliliters
4Data is for trans-1,3-Dichloropropene and bromomethane
5 Data was selected from states with a similar climate to MN. The appropriate states were determined using Figure 1.3 from the Stormwater BMP Design Supplement for Cold Climates document.
6BDL = below detection level
7The following censoring techniques were used for this data:
This page was last edited on 2 February 2023, at 15:05.