Difference between revisions of "References for permeable pavement"
m (1 revision) |
m |
||
| Line 1: | Line 1: | ||
| − | *AASHTO 1993. Guide for Design of Pavement Structures, American Association of State Highway and Transportation Officials, Washington, DC. | + | *American Association of State highway and Transportation Officials (AASHTO). 1993. ''Guide for Design of Pavement Structures'', American Association of State Highway and Transportation Officials, Washington, DC. |
| − | *[http://www.concrete.org/bookstorenet/productdetail.aspx?itemid=52210 ACI 2010]. ACI Committee 522 | + | *[http://www.concrete.org/bookstorenet/productdetail.aspx?itemid=52210 ACI 2010]. ACI Committee 522. ''Report on Pervious Concrete''. American Concrete Institute, Farmington Hills, MI, ACI 522R-10. March 2010. |
| − | *ACPA 2010. PerviousPave Technical Guidance | + | *American Concrete Paverment Association ACPA 2010. ''PerviousPave Technical Guidance''. American Concrete Pavement Association. Chicago, IL. |
| − | * | + | *California Stormwater Quality Association [http://www.casqa.org/(CASQA)]. 2003. ''California Stormwater BMP Handbook. New Development and Redevelopment''. |
| − | *Hansen 2008, Hansen, K., Porous Asphalt Pavements for Stormwater Management | + | *Erickson, A.J. and Gulliver, J.S. ''Performance Assessment of an Iron-Enhanced Sand Filtration Trench for Capturing Dissolved Phosphorus''. Project Report No. 549. St. Anthony Falls Laboratory. University of Minnesota. Minneapolis, Minnesota. Prepared for the City of Prior Lake, Minnesota. |
| − | * | + | *Hansen 2008, Hansen, K., ''Porous Asphalt Pavements for Stormwater Management''. [http://www.asphaltpavement.org/ National Asphalt Pavement Association, Information Series 131, Lanham, Maryland. |
| + | *Leming, M. L., Malcom, H. R., and Tennis, P. D.. 2007. ''Hydrologic Design of Pervious Concrete''. EB303. Portland Cement Association, Skokie, Illinois, and National Ready Mixed Concrete Association, Silver Spring, Maryland. | ||
*MAPA 2012. “Guidance Specification for Porous or Dense-Graded Hot-Mix Asphalt Pavement Structures for Storm Water Management,” Minnesota Asphalt Pavement Association, New Brighton, MN. January 3, 2012. | *MAPA 2012. “Guidance Specification for Porous or Dense-Graded Hot-Mix Asphalt Pavement Structures for Storm Water Management,” Minnesota Asphalt Pavement Association, New Brighton, MN. January 3, 2012. | ||
| − | * | + | *Minnesota Department of Transportation. 2005. ''MnDOT Standard Specifications Book''. Division III – Materials. Minnesota Department of Transportation. St. Paul, Minnesota. |
| − | * | + | *Smith, D.R.. 2011. ''Permeable Interlocking Concrete Pavements''. Fourth Edition. Interlocking Concrete Pavement Institute, Herndon. Virginia. |
| − | *USEPA 2008. June 13, 2008 Memo. L. Boornaizian and S. Heare. | + | *United States Environmental Protection agency (USEPA). 2008. June 13, 2008 Memo. L. Boornaizian and S. Heare. ''Clarification on which stormwater infiltration practices/technologies have the potential to be regulated as “Class V” wells by the Underground Injection Control Program''. Water Permits Division and Drinking Water Protection Division. Washington, D.C. |
[[category:BMP]] | [[category:BMP]] | ||
Revision as of 17:26, 6 December 2012
- American Association of State highway and Transportation Officials (AASHTO). 1993. Guide for Design of Pavement Structures, American Association of State Highway and Transportation Officials, Washington, DC.
- ACI 2010. ACI Committee 522. Report on Pervious Concrete. American Concrete Institute, Farmington Hills, MI, ACI 522R-10. March 2010.
- American Concrete Paverment Association ACPA 2010. PerviousPave Technical Guidance. American Concrete Pavement Association. Chicago, IL.
- California Stormwater Quality Association [1]. 2003. California Stormwater BMP Handbook. New Development and Redevelopment.
- Erickson, A.J. and Gulliver, J.S. Performance Assessment of an Iron-Enhanced Sand Filtration Trench for Capturing Dissolved Phosphorus. Project Report No. 549. St. Anthony Falls Laboratory. University of Minnesota. Minneapolis, Minnesota. Prepared for the City of Prior Lake, Minnesota.
- Hansen 2008, Hansen, K., Porous Asphalt Pavements for Stormwater Management. [http://www.asphaltpavement.org/ National Asphalt Pavement Association, Information Series 131, Lanham, Maryland.
- Leming, M. L., Malcom, H. R., and Tennis, P. D.. 2007. Hydrologic Design of Pervious Concrete. EB303. Portland Cement Association, Skokie, Illinois, and National Ready Mixed Concrete Association, Silver Spring, Maryland.
- MAPA 2012. “Guidance Specification for Porous or Dense-Graded Hot-Mix Asphalt Pavement Structures for Storm Water Management,” Minnesota Asphalt Pavement Association, New Brighton, MN. January 3, 2012.
- Minnesota Department of Transportation. 2005. MnDOT Standard Specifications Book. Division III – Materials. Minnesota Department of Transportation. St. Paul, Minnesota.
- Smith, D.R.. 2011. Permeable Interlocking Concrete Pavements. Fourth Edition. Interlocking Concrete Pavement Institute, Herndon. Virginia.
- United States Environmental Protection agency (USEPA). 2008. June 13, 2008 Memo. L. Boornaizian and S. Heare. Clarification on which stormwater infiltration practices/technologies have the potential to be regulated as “Class V” wells by the Underground Injection Control Program. Water Permits Division and Drinking Water Protection Division. Washington, D.C.