Difference between revisions of "File:Dissipation bad 7.JPG"
File:Dissipation bad 7.JPG

Latest revision as of 16:43, 19 December 2022

Energy dissipation has been installed at pipe outlet. Energy dissipation must be installed at pipe outlet within 24 hours after connection to a surface water.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	16:13, 3 November 2016		2,304 × 1,728 (1.7 MB)	Mtrojan (talk \| contribs)

You cannot overwrite this file.

File usage

The following page uses this file:

Construction stormwater photo gallery - Outlet energy dissipation

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	EASTMAN KODAK COMPANY
Camera model	KODAK CX7430 ZOOM DIGITAL CAMERA
Exposure time	1/350 sec (0.0028571428571429)
F Number	f/2.7
Date and time of data generation	13:43, 17 May 2005
Lens focal length	5.6 mm
Orientation	Normal
Horizontal resolution	230 dpi
Vertical resolution	230 dpi
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.21
Date and time of digitizing	13:43, 17 May 2005
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	8.5
APEX aperture	2.9
APEX exposure bias	0
Maximum land aperture	2.9 APEX (f/2.73)
Metering mode	Pattern
Light source	Unknown
Flash	Flash did not fire, auto mode
Supported Flashpix version	0,100
Color space	sRGB
Exposure index	80
Sensing method	One-chip color area sensor
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	0
Focal length in 35 mm film	34 mm
Scene capture type	Standard
Scene control	None
Contrast	Normal
Saturation	Normal
Sharpness	Normal
Subject distance range	Unknown

Revision as of 16:13, 3 November 2016 (view source) Mtrojan (talk \| contribs)	Latest revision as of 16:43, 19 December 2022 (view source) Mtrojan (talk \| contribs) m
(One intermediate revision by the same user not shown)
Line 1:	Line 1:
	+	Energy dissipation has been installed at pipe outlet. Energy dissipation must be installed at pipe outlet within 24 hours after connection to a surface water.

	+	[[Category:Level 3 - General information, reference, tables, images, and archives/Images/Sediment control photos]]

Difference between revisions of "File:Dissipation bad 7.JPG" File:Dissipation bad 7.JPG

Latest revision as of 16:43, 19 December 2022

File history

File usage

Metadata

Difference between revisions of "File:Dissipation bad 7.JPG"
File:Dissipation bad 7.JPG