Difference between revisions of "Sand material specifications"
(Created page with " <center><font size=3>'''Sand material specifications'''.</font size><br> Link to this table</center> <table class="sortable"><tr> <th>Paramet...") |
m |
||
| (8 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | <font size=3>'''This table shows sand material specifications'''.</font size><br> | |
| − | + | Link to this [[Sand material specifications|table]] | |
| − | Link to this [[Sand material specifications|table]] | ||
<table class="sortable"><tr> | <table class="sortable"><tr> | ||
<th>Parameter</th> | <th>Parameter</th> | ||
| − | <th> | + | <th>specification</th> |
<th>Size</th> | <th>Size</th> | ||
<th>Notes</th> | <th>Notes</th> | ||
| Line 15: | Line 14: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
| − | <td> | + | <td>Underdrain Gravel</td> |
<td>AASHTO M-43</td> | <td>AASHTO M-43</td> | ||
<td>1.5” to 3.5”</td> | <td>1.5” to 3.5”</td> | ||
| − | <td> | + | <td> </td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
| Line 42: | Line 41: | ||
<td>Under-drain Piping</td> | <td>Under-drain Piping</td> | ||
<td>ASTM D-1785 or AASHTO M-278</td> | <td>ASTM D-1785 or AASHTO M-278</td> | ||
| − | <td> | + | <td>minimum 4” rigid schedule 40 PVC</td> |
| − | <td>3/8” perf. @ 6” on center, 4 holes per row; minimum of 3” | + | <td>3/8” perf. @ 6” on center, 4 holes per row; minimum of 3” washed #57 stone over pipes; not necessary underneath pipes</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
| − | + | </table> | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | </ | + | <noinclude> |
| + | [[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Sand filter, iron enhanced sand filter, media filter]] | ||
| + | [[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Media, compost, and media amendments]] | ||
| + | [[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Swales]] | ||
| + | </noinclude> | ||
Latest revision as of 16:49, 4 August 2022
This table shows sand material specifications.
Link to this table
| Parameter | specification | Size | Notes |
|---|---|---|---|
| Sand | clean AASHTO M-6 or ASTM C-33 concrete sand | 0.02” to 0.04” | Sand substitutions such as Diabase and Graystone #10 are not acceptable. No calcium carbonated or dolomitic sand substitutions are acceptable. Rock dust cannot be substituted for sand. |
| Underdrain Gravel | AASHTO M-43 | 1.5” to 3.5” | |
| Geotextile Fabric (if required) |
ASTM D-4833 (puncture strength - 125 lb.) ASTM D-1117 (Mullen Burst Strength - 400 psi) ASTM D-4632 (Tensile Strength - 300 lb.) |
0.08” thick equivalent opening size of #80 sieve | Must maintain 125 gpm per sq. ft. flow rate. Note: a 4” pea gravel layer may be substituted for geotextiles meant to separate sand filter layers. |
| Impermeable Liner (if required) |
ASTM D-4833 (thickness) ASTM D-412 (tensile strength 1,100 lb., elongation 200%) ASTM D-624 (Tear resistance - 150 lb./in) ASTM D-471 (water adsorption: +8 to -2% mass) |
30 mil thickness | Liner to be ultraviolet resistant. A geotextile fabric should be used to protect the liner from puncture. |
| Under-drain Piping | ASTM D-1785 or AASHTO M-278 | minimum 4” rigid schedule 40 PVC | 3/8” perf. @ 6” on center, 4 holes per row; minimum of 3” washed #57 stone over pipes; not necessary underneath pipes |
Categories:
- Level 3 - General information, reference, tables, images, and archives/Tables/Sand filter, iron enhanced sand filter, media filter
- Level 3 - General information, reference, tables, images, and archives/Tables/Media, compost, and media amendments
- Level 3 - General information, reference, tables, images, and archives/Tables/Swales
This page was last edited on 4 August 2022, at 16:49.