Difference between revisions of "Pollutant concentrations1 for filtration BMPs"
m |
m |
||
| (One intermediate revision by the same user not shown) | |||
| Line 38: | Line 38: | ||
<noinclude> | <noinclude> | ||
| − | |||
[[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Sand filter, iron enhanced sand filter, media filter]] | [[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Sand filter, iron enhanced sand filter, media filter]] | ||
| + | [[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Pollutant loading, concentrations, and characteristics]] | ||
</noinclude> | </noinclude> | ||
Latest revision as of 17:29, 8 December 2022
Typical pollutant effluent concentrations, in milligrams per liter, for filtration BMPs.
Link to this table
| Practice | TSS Low-Med-High4 | TP Low-Med-High4 | TN | Cu | Zn |
|---|---|---|---|---|---|
| Media Filter2 | 5-11-16 | 0.06-0.10-0.19 | 1.1 | 0.008 | 0.060 |
| Vegetative Filter3 | 13-20-44 | 0.15-0.24-0.36 | 1.1 | 0.008 | 0.060 |
1 All concentration values in mg/L which equals parts per million
2 For example, sand, mixed sand/peat and other geologic media
3 Grass filter/swale
4 Not enough information given in databases to differentiate type of filter so both combined for this entry
This page was last edited on 8 December 2022, at 17:29.