Difference between revisions of "BMP design considerations for ground water aquifer protection"
BMP design considerations for ground water aquifer protection

Latest revision as of 20:03, 4 August 2022

BMP design considerations for groundwater aquifer protection
Link to this table

BMP Group	Design Consideration
Bioretention	OK with proper caution for PSH
Filtration	OK with proper caution for PSH Open channels are OK, but polluted runoff must be adequately pretreated
Infiltration	Provide a 100-foot horizontal separation distance from wells and three-foot vertical distance from the water table No PSH runoff, unless treated by another practice, such as a filtering system Needed pre-treatment of all runoff except rooftop
Stormwater Ponds	May need liner if A soils or active karst are present. The CSW permit requires a liner in areas of active karst. Pre-treat PSH runoff Provide a separation distance from well or water table to BMP
Constructed Stormwater Wetlands	May need liner if A soils or active karst are present. The CSW permit requires a liner in areas of active karst. Pre-treat PSH runoff Provide a separation distance from well or water table to BMP

@@ Line 26: / Line 26: @@
 <td>Stormwater Ponds</td>
 <td>
-*Needed liner if A soils or active karst are present
+*May need liner if A soils or active karst are present. The CSW permit requires a liner in areas of active karst.
 *Pre-treat PSH runoff
 *Provide a separation distance from well or water table to BMP</td>
@@ Line 33: / Line 33: @@
 <td>Constructed Stormwater Wetlands</td>
 <td>
-*May needed liner if A soils or active karst are present
+*May need liner if A soils or active karst are present. The CSW permit requires a liner in areas of active karst.
 *Pre-treat PSH runoff
 *Provide a separation distance from well or water table to BMP</td>
 </table>
-<noinclude>[[Category:table]]<noinclude>
+<noinclude>
+[[Category:Level 3 - General information, reference, tables, images, and archives/Tables/General bmp information]]
+</noinclude>