m |
m |
||
Line 295: | Line 295: | ||
*water holding capacity - the amount of water that can be held in a soil between saturation and a specific pressure. Field capacity (1/3 bar pressure) and wilting point (15 bar pressure) are commonly used to define a soil's water holding capacity. | *water holding capacity - the amount of water that can be held in a soil between saturation and a specific pressure. Field capacity (1/3 bar pressure) and wilting point (15 bar pressure) are commonly used to define a soil's water holding capacity. | ||
*water quality sizing - tied to the volume of stormwater runoff | *water quality sizing - tied to the volume of stormwater runoff | ||
− | *water quality volume - the | + | *water quality volume - The volume of water that is treated by a BMP. To meet the requirements of the Construction Stormwater General Permit, the Water Quality Volume means one (1) inch of runoff from the new impervious surfaces created by the project (calculated as an instantaneous volume) and is the volume of water to be treated in the Permanent Stormwater Management System, as required by the permit. |
*watershed - a topographically defined area within which all water drains to a particular point | *watershed - a topographically defined area within which all water drains to a particular point | ||
*watershed inch - a unit of measure corresponding to the volume of water spread out over the entire watershed area at a depth of one inch | *watershed inch - a unit of measure corresponding to the volume of water spread out over the entire watershed area at a depth of one inch |