Difference between revisions of "Summary of horizontal and vertical setback distances"
m |
m |
||
| Line 18: | Line 18: | ||
<tr> | <tr> | ||
<td>Bedrock</td> | <td>Bedrock</td> | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
<td>3</td> | <td>3</td> | ||
<td>Requirement</td> | <td>Requirement</td> | ||
| Line 57: | Line 51: | ||
<td></td> | <td></td> | ||
<td></td> | <td></td> | ||
| − | <td></td> | + | <td>No specific distance. Infiltration must not mobilize contaminants.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
Revision as of 15:01, 23 September 2015
Required and recommended minimum vertical and horizontal separation distances. This represents the minimum distance from the infiltration practice to the structure of concern. If the structure is aboveground, the distance is measured from the edge of the permeable pavement to the structure. If the structure is underground, the vertical separation distance represents the distance from the point of infiltration through the bottom of the system to the structure, while the horizontal separation (often called setback) distance is the shortest distance from the edge of the system to the structure.
Link to this table
| Structure | Distance (feet) | Requirement or recommendation | Note(s) | |
|---|---|---|---|---|
| Vertical | Saturated soil | 3 | Requirement | |
| Bedrock | 3 | Requirement | ||
| Horizontal | Drinking water well | 100 | Requirement | |
| Building/structure | 10 | Recommended | ||
| Surface water | none unless local requirements exist | If nearby stream is impaired for chloride, see [1] | ||
| Septic system | 35 | Recommended | ||
| Contaminated soil/groundwater | No specific distance. Infiltration must not mobilize contaminants. | |||
| Slope | 200 | Recommended | from toe of slope >= 20% | |
| Karst | 1000 up-gradient 100 down-gradient | Requirement | Active karst | |