Difference between revisions of "Contributing drainage area to stormwater BMPs"
m |
m |
||
| Line 1: | Line 1: | ||
| − | Contributing area is defined as the total area, including pervious and impervious surfaces, contributing to a BMP. It is assumed that in most cases, with the exception of green roofs and many permeable pavement systems, impervious surfaces will constitute more than 50 percent of the contributing area to the BMP and that most of this impervious is directly connected. The recommended contributing area to a BMP may be modified for the following conditions. | + | Contributing drainage area is defined as the total area, including pervious and impervious surfaces, contributing to a BMP. It is assumed that in most cases, with the exception of green roofs and many permeable pavement systems, impervious surfaces will constitute more than 50 percent of the contributing area to the BMP and that most of this impervious is directly connected. The recommended contributing area to a BMP may be modified for the following conditions. |
*The recommended contributing area may be increased if pervious surfaces constitute the majority of the contributing area and soils are [https://stormwater.pca.state.mn.us/index.php?title=Design_infiltration_rates hydrologic soil group] (HSG) A or B | *The recommended contributing area may be increased if pervious surfaces constitute the majority of the contributing area and soils are [https://stormwater.pca.state.mn.us/index.php?title=Design_infiltration_rates hydrologic soil group] (HSG) A or B | ||
*The recommended contributing area should be decreased if impervious surfaces contribute more than 80 percent of the contributing area or if the entire impervious surface is directly connected and routed to the BMP | *The recommended contributing area should be decreased if impervious surfaces contribute more than 80 percent of the contributing area or if the entire impervious surface is directly connected and routed to the BMP | ||
Revision as of 14:23, 6 June 2022
Contributing drainage area is defined as the total area, including pervious and impervious surfaces, contributing to a BMP. It is assumed that in most cases, with the exception of green roofs and many permeable pavement systems, impervious surfaces will constitute more than 50 percent of the contributing area to the BMP and that most of this impervious is directly connected. The recommended contributing area to a BMP may be modified for the following conditions.
- The recommended contributing area may be increased if pervious surfaces constitute the majority of the contributing area and soils are hydrologic soil group (HSG) A or B
- The recommended contributing area should be decreased if impervious surfaces contribute more than 80 percent of the contributing area or if the entire impervious surface is directly connected and routed to the BMP
- The recommended contributing area should be decreased or may be increased based on pollutant loading (decrease with higher pollutant loads)
Runoff coefficients may be calculated for an area contributing to a BMP. Runoff coefficients greater than about 0.55 are typical of urban areas having 50 percent or more impervious surface. Typical runoff coefficients are shown on these pages ([1], [2]) and discussed here. To see how runoff curve number is associated with impervious percentages, see Table 2-2a, page 17, at this link.