Difference between revisions of "2020 MS4 General Permit Section 14 Mapping"
(→14.2) |
(→14.2) |
||
| Line 11: | Line 11: | ||
:b. outfalls, including a unique identification (ID) number assigned by the permittee, and an associated geographic coordinates; | :b. outfalls, including a unique identification (ID) number assigned by the permittee, and an associated geographic coordinates; | ||
| − | :c. structural stormwater BMPs that are part of the permittee's MS4; and | + | :c. structural stormwater [https://stormwater.pca.state.mn.us/index.php?title=2020_MS4_General_Permit_Section_27_Definitions#27.6 BMPs] that are part of the permittee's MS4; and |
:d. all receiving waters. [[https://www.revisor.mn.gov/rules/7090/ Minn. R. 7090]]</big> | :d. all receiving waters. [[https://www.revisor.mn.gov/rules/7090/ Minn. R. 7090]]</big> | ||
Revision as of 16:36, 10 February 2021
Section 14 Mapping
14.1
Mapping. [Minn. R. 7090]
14.2
New permittees must develop, and existing permittees must update, as necessary, a storm sewer system map that depicts the following:
- a. the permittee's entire MS4 as a goal, but at a minimum, all pipes 12 inches or greater in diameter, including stormwater flow direction in those pipes;
- b. outfalls, including a unique identification (ID) number assigned by the permittee, and an associated geographic coordinates;
- c. structural stormwater BMPs that are part of the permittee's MS4; and
- d. all receiving waters. [Minn. R. 7090]