Difference between revisions of "Primary and secondary pollutant removal mechanisms"
Primary and secondary pollutant removal mechanisms

Revision as of 16:49, 2 January 2013

BMP group	Pollutant removal mechanisms
	Water quality						Water quantity>
	Screening/filtration	Infiltration/recharge	Settling	Biological uptake	Temperature control	Soil adsorption	Volume control	Rate control	Velocity control	ET^a
Pollution prevention	Not applicable - pollutants not exposed to stormwater
Better Site Design/low impact development
Runoff volume minimization
Temporary construction sediment control
Bioretention
Filtration									X
Infiltration
Stormwater ponds
Stormwater wetlands
Supplemental treatment	Each supplemental and proprietary device should be carefully studied to learn the primary and secondary removal functions

@@ Line 25: / Line 25: @@
 </tr>
 <tr>
-<td width="20%">Better Site Design/low impact development</td>
+<td WIDTH="20%">Better Site Design/low impact development</td>
-<td width="8%"><center>{{circle|full}}</center></td>
+<td WIDTH="8%"><center>{{circle|full}}</center></td>
-<td width="8%">{{circle|half}}</td>
+<td WIDTH="8%">{{circle|half}}</td>
-<td width="8%">{{circle|half}}</td>
+<td WIDTH="8%">{{circle|half}}</td>
-<td width="8%">{{circle|half}}</td>
+<td WIDTH="8%">{{circle|half}}</td>
-<td width="8%">{{circle|half}}</td>
+<td WIDTH="8%">{{circle|half}}</td>
-<td width="8%">{{circle|half}}</td>
+<td WIDTH="8%">{{circle|half}}</td>
-<td width="8%">{{circle|full}}</td>
+<td WIDTH="8%">{{circle|full}}</td>
-<td width="8%">{{circle|half}}</td>
+<td WIDTH="8%">{{circle|half}}</td>
-<td width="8%">{{circle|half}}</td>
+<td WIDTH="8%">{{circle|half}}</td>
-<td width="8%">{{circle|half}}</td>
+<td WIDTH="8%">{{circle|half}}</td>
 </tr>
 <tr>