Difference between revisions of "Calculate application rate"
| Line 11: | Line 11: | ||
<table class="sortable"> | <table class="sortable"> | ||
<tr> | <tr> | ||
| − | <th> | + | <th>A</th> |
<th>B</th> | <th>B</th> | ||
<th>C</th> | <th>C</th> | ||
| Line 21: | Line 21: | ||
<tr> | <tr> | ||
| − | <th>Speed</ | + | <th>Speed</th> |
<th>Lever position or gate setting</th> | <th>Lever position or gate setting</th> | ||
<th>Pounds spread in 10 feet*</th> | <th>Pounds spread in 10 feet*</th> | ||
Revision as of 17:24, 25 February 2016
Link to this table
Equipment ____________________________________
Material _____________________________
Date: -_____________
| A | B | C | D | E | F | G |
|---|---|---|---|---|---|---|
| Speed | Lever position or gate setting | Pounds spread in 10 feet* | Spread width in feet | Coverage area in sq. ft. (D x 10)* | Application rate in lbs./1000 ft2 (1000/E x C) | Application rate in lbs./lane mile (12’ width) (F x 63.4) |
| Example | ||||||
| 20 MPH | Half-closed | 0.4 lbs | 13 feet | 130 sq. ft. | 3.1 lbs. per 1000 sq. ft. | 196 lbs./mile |