Difference between revisions of "Chemical and physical properties of wood chips"
m |
m |
||
| Line 78: | Line 78: | ||
*Chandrasekaran et al., 2012 | *Chandrasekaran et al., 2012 | ||
*Venner et al., 2011 | *Venner et al., 2011 | ||
| − | *New York State Energy Research and Development Authority, 2013<br> | + | *New York State Energy Research and Development Authority, 2013 |
| + | *Warner, 1976<br> | ||
<sup>1</sup>CEC increased as chip size decreased</font size> | <sup>1</sup>CEC increased as chip size decreased</font size> | ||
Revision as of 21:50, 12 May 2021
Chemical and physical properties of wood chips. For concentrations of metals, link here.
Link to this table
| Property | Range found in literature1 | Median value from literature |
|---|---|---|
| Total phosphorus (mg/kg) | 0.027 - 0.24 | 0.13 |
| Total nitrogen (mg/kg) | 0.31 – 1.8 | 0.38 |
| Total potassium (mg/kg) | 100-1600 | 709 |
| Total carbon (mg/kg) | 434-498 | 47.1 |
| pH | 3.34-5.07 | 3.47 |
| Cation exchange capacity (cmol/kg)1 |
|
|
| Electrical conductivity (ds/m) | ||
| Total calcium (mg/kg) | 600-6200 | 1190 |
| Total magnesium (%) | 60-6200 | 189 |
| Bulk density (g/cm3) | 0.138 - 0.422 | 0.293 |
| Water holding capacity (% by wt) | 58.5 | |
| Total pore space (%) | 60-63 | 61.5 |
Primary references for this data:
- Ima and Mann, 2007
- Hamid et al., 2016
- Pintor-Ibarra et al., 2016
- Kim et al., 2016
- Chandrasekaran et al., 2012
- Venner et al., 2011
- New York State Energy Research and Development Authority, 2013
- Warner, 1976
1CEC increased as chip size decreased