Soil physical properties and processes

This site is currently undergoing revision. For more information, open this link.
This page is in development

Physical properties of soil include color, texture, structure, porosity, density, consistence, and temperature. These properties affect processes such as infiltration, erosion, and biologic activity. These properties also affect suitability of soil for different uses, such as stormwater infiltration, subgrade for roads, and strength for building.

This page provides an overview of soil physical properties, processes they affect, and their affect on use, primarily for stormwater applications.

Soil texture

Soil texture triangle showing the USDA classification system based on grain size. Click on image to enlarge.

Soil texture (such as loam, sandy loam or clay) refers to the proportion of sand, silt and clay sized particles that make up the mineral fraction of the soil. Soil texture is determined with one of the following methods.

• Mechanical sieving, if particle size > 0.05 mm
• Sedimentation if size < 0.05 mm. Sedimentation measures the settling rate of particles in liquid medium and relates this rate to the particle mass by use of the Stokes law. Forces acting on soil particle are gravitation, buoyancy and drag forces, all of which depend on particle size. Larger particles settle first. The particle mass is determined by density and particle size. Soils must be dispersed prior to measurement. Two methods are commonly used.
  • Hydrometer method (see here for description)
  • Pipette method (see this video for a description)

Other methods are used to determine texture, but these employ qualitative approaches. They include the feel method, ball and ribbon methos, and ball throwing method. These are described here. These methods may be satisfactory for some applications, such as determining if a soil may be suitable for infiltration, but they must be conducted by an experienced person, such as a professional soil scientist.

The following particle size distribution, based on sieve analysis, is commonly used to define soil particles.

• gravel > 2 mm
• sand 0.05 - 2 mm
• very coarse 1 - 2 mm
• coarse 0.5 - 1 mm
• medium 0.25 - 0.5 mm
• fine 0.1 - 0.25 mm
• very fine 0.05 - 0.1 mm
• silt 0.002 - 0.05 mm
• clay < 0.002 mm (< 2 micrometer)

Soil texture describes the distribution of these different size particles in a soil. There are twelve soils based on the distribution of sand, silt and clay. The adjacent image displays the soil texture triangle, which assigns soil type based on the distribution of sand, silt, and clay.

Texture affects many soil processes, including infiltration, drainage (water and air distribution), erosion, chemical processes, and biologic processes. These are discussed generally below.

• Sand: limited structural development, rapid infiltration, rapid drainage, low water holding capacity, leaching of minerals and organic material, reduced chemical and biological processing compared to soils with high clay content
• Silt: poor structural development, moderate infiltration rates, well drained, moderate rates of chemical and biological processing, easily eroded and compacted
• Clay: slow infiltration rates, poorly drained, high water holding capacity, high rates of chemical processing when not compacted or saturated, easily compacted
• Loam: since these are a mixture of sand, silt, and clay, these soils are generally well drained, have good water holding capacity, are chemically and biologically diverse and active

Soil structure

Types of soil structure. Image from Deeproot

This page provides a nice overview and discussion of soil structure.

Soil structure describes the arrangement and organization of soil particles in the soil, and the tendency of individual soil particles to bind together in aggregates. Aggregation affects water and air transport, which affects the movement of solutes and pollutants and affects biologic activity, including plant growth.

Structure development is influenced by

• the amount and type of clay, as well as the exchangeable ions on the clay;
• the amount and type of organic matter, which provides food for soil fungi and bacteria and their secretion of cementing agents (polysaccharides)
• the presence of cementing agents such as iron and aluminum oxides; and
• vegetation, which produces organic matter and binds soil particles together through rooting.

Soil structure is typically divided into one of the following groups, as illustrated in the adjacent image.

• Granular – roughly spherical, like grape nuts. Usually 1-10 mm in diameter. Most common in A horizons, where plant roots, microorganisms, and sticky products of organic matter decomposition bind soil grains into granular aggregates
• Aggregated - this structural type is often not included in classifications, but represents a soil where some granular components have aggregated, but not to the extent found in prismatic or columnar structures.
• Platy – flat peds that lie horizontally in the soil. Platy structure can be found in A, B and C horizons. It commonly occurs in an A horizon as the result of compaction.
• Blocky – roughly cube-shaped, with more or less flat surfaces. If edges and corners remain sharp, we call it angular blocky. If they are rounded, we call it subangular blocky. Sizes commonly range from 5-50 mm across. Blocky structures are typical of B horizons, especially those with a high clay content. They form by repeated expansion and contraction of clay minerals.
• Prismatic – larger, vertically elongated blocks, often with five sides. Sizes are commonly 10-100mm across. Prismatic structures commonly occur in fragipans.
• Columnar – the units are similar to prisms and are bounded by flat or slightly rounded vertical faces. The tops of columns, in contrast to those of prisms, are very distinct and normally rounded.

Soil structure affects water and air movement in soil and is therefore important to soil biota. Platy and massive soils have restricted air and water movement, while granular and aggregated soils have enhanced air and water transport.

Soil structure can be altered by human activity, including the following.

• Compaction, which leads to platy and blocky structure
• Cultivation, which breaks up aggregates in the plow layer but can compact deeper layers
• Removal of vegetation, which reduces aggregation
• Excessive moving and handling of soil, which can destroy aggregates or lead to compaction
• Excessive sodium, often through irrigation, which disperses soil and breaks down structure

Soil density

Soil density is related to the mineral and organic composition of a soil and to soil structure. The standard measure of soil density is bulk density, defined as the proportion of the weight of a soil relative to its volume. It is expressed as a unit of weight per volume, and is commonly measured in units of grams per cubic centimeters (g/cm³). Bulk density is an indicator of the amount of pore space available within individual soil horizons, as it is inversely proportional to pore space:

Pore space = 1 – bulk density/particle density

where particle density is the weight/volume of the solid material. Typical particle densities are 2.65 g/cm³ for minerals and 1.3 g/cm³ for organic matter.

For example, at a bulk density of 1.60 g/cm³, pore space equals 0.40 or 40%. At a bulk density of 1.06 g/cm³, pore space equals 0.60 or 60%.

Because of the lower particle density of organic matter compared to minerals, soils with higher concentrations of organic matter have lower bulk densities. Typical bulk densities of different soils are illustrated in the adjacent table.

Comparison of bulk densities for undisturbed soils and common urban conditions. (Source: Schueler, T. 2000. The Compaction of Urban Soils: Technical Note #107 from Watershed Protection Techniques. 3(2): 661-665. Center for Watershed Protection, Ellicott City, MD.)
For information on alleviating soil compaction, see Alleviating compaction from construction activities
Link to this table

Undisturbed soil type or urban condition	Surface bulk density (grams / cubic centimeter
Peat	0.2 to 0.3
Compost	1.0
Sandy soil	1.1 to 1.3
Silty sands	1.4
Silt	1.3 to 1.4
Silt loams	1.2 to 1.5
Organic silts / clays	1.0 to 1.2
Glacial till	1.6 to 2.0
Urban lawns	1.5 to 1.9
Crushed rock parking lot	1.5 to 2.0
Urban fill soils	1.8 to 2.0
Athletic fields	1.8 to 2.0
Rights of way and building pads (85% compaction)	1.5 to 1.8
Rights of way and building pads (95% compaction)	1.6 to 2.1
Concrete pavement	2.2
Quartzite (rock)	2.65

Bulk density affects water and air transport in soils. Soils with high densities resist water and air transport. Soils with high density may also impede root growth.

Several human activities affect bulk density. Soils at construction sites are generally compacted as a result of excavation, mixing, stockpiling, equipment storage, and equipment traffic. In addition, exposed subsoil is susceptible to compaction. Clay soils and wet soils are more susceptible to compaction. Even at sites where selective grading is employed, compaction occurs as a result of construction equipment, stockpiling and vehicle traffic (Randrup, 1998; Lichter and Lindsay, 1994).

When soil is compacted, porosity decreases and bulk density increases. Typical increases in bulk density are shown in the adjacent table, with other compacting activities included for comparison. As a result, permeability of air and water in soil decreases, soil water-holding capacity is reduced, and root growth is impeded. On a watershed scale, soil compaction leads to increased runoff and erosion.

Increase in soil bulk density as a result of different land uses or activities.
Link to this table

Land use or activity	Increase in bulk density (grams / cubic centimeter	Source (link to Reference list)
Grazing	0.12 to 0.20	Smith, 1999
Crops	0.25 to 0.35	Smith, 1999
Construction, mass grading	0.34 to 0.35	Randrup, 1998; Lichter and Lindsey, 1994
Construction, no grading	0.20	Lichter and Lindsey, 1994
Construction traffic	0.17 to 0.40	Lichter and Lindsey, 1994; Smith, 1999; Friedman, 1998
Athletic fields	0.38 to 0.54	Smith, 1999
Urban lawn and turf	0.30 to 0.40	Various sources

The effects of compaction are difficult to overcome and may persist for decades. Natural processes such as freeze-thaw cycles, animal burrowing, and root growth only slowly diminish compaction. These natural processes are typically limited to the upper foot or two of soil. Even when bulk densities decrease, the original soil structure may not be achieved (Randrup, 1997; Schueler and Holland, 2000).

The following table summarizes results for different activities designed to alleviate compaction. The results suggest compost amendment is an effective method for alleviating compaction, while tillage is considerably less effective. Note however, this is an area of on-going research and some recent studies suggest properly conducted tillage can be effective at reducing compaction. For an example, link here.

Reported Activities that Restore or Decrease Soil Bulk Density
Link to this table

Land use or activity	Decrease in bulk density (gms/cc)	Source
Tilling of soil	0.00 to 0.02	Randrup, 1918. Patterson and Bates, 1994
Spedialized soil loosening	0.05 to 0.15	Rolf, 1998
Selective grading	0.00	Randrup, 1998 and Lichter and Linsy, 1994
Soil amendments	0.17	Patterson and Bates, 1994
Compost amendments	0.25 to 0.35	Kolsti et al. 1995
Time	0.20	Legg et al, 1996
Reforestration	0.25 to 0.35	Article 36

Recommended links

• Food and Agricultural Organization
• University of Nevada, Reno
• University of California, Davis
• USDA-NRCS
• Wikipedia
• [What is Soil Structure and Why is it Important? - Deeproot