m
m
Line 33: Line 33:
  
 
==Design phase storage siting==
 
==Design phase storage siting==
*[https://ncdenr.s3.amazonaws.com/s3fs-public/Energy%20Mineral%20and%20Land%20Resources/Stormwater/BMP%20Manual/Ch%2025%20RWH%20Final%20Draft.pdf North Carolina Stormwater BMP Manual], Chapter 25, Rainwater Harvesting: Section 25.4.18, Provide Maintenance Access. This section of the North Carolina manual provides a list of considerations for maintenance access, but note that this manual does not provide adequate guidance on cold climate considerations.
+
*[https://ncdenr.s3.amazonaws.com/s3fs-public/Energy%20Mineral%20and%20Land%20Resources/Stormwater/BMP%20Manual/Ch%2025%20RWH%20Final%20Draft.pdf North Carolina Stormwater BMP Manual], Chapter 25, Rainwater Harvesting: Section 25.4.18, Provide Maintenance Access. This section of the North Carolina manual provides a list of considerations for maintenance access, but note that this manual does not provide adequate guidance on cold climate considerations.
 
*[https://wrrc.arizona.edu/sites/wrrc.arizona.edu/files/Bellingham_Rainwater%20harvesting%20manual.pdf City of Bellingham, WA Rainwater Harvesting Guidance]: Part B, Integrating rainwater harvesting with other parts of site design, site structures; Step 8, Determine possible tank location and overflow location
 
*[https://wrrc.arizona.edu/sites/wrrc.arizona.edu/files/Bellingham_Rainwater%20harvesting%20manual.pdf City of Bellingham, WA Rainwater Harvesting Guidance]: Part B, Integrating rainwater harvesting with other parts of site design, site structures; Step 8, Determine possible tank location and overflow location
*[http://connectthedrops.ca/downloads/ONTARIO_RWH_HANDBOOK_2010.pdf Ontario Residential Rainwater Harvesting Systems Handbook]: 2.4 -3, Determine the location of the rainwater storage tank
+
*[https://www.harvesth2o.com/adobe_files/ONTARIO_RWH_HANDBOOK_2010.pdf Ontario Residential Rainwater Harvesting Systems Handbook]: 2.4 -3, Determine the location of the rainwater storage tank
  
 
==Design==
 
==Design==
Line 41: Line 41:
 
===Required Storage Capacity===
 
===Required Storage Capacity===
 
*Lawson,Sarah, Adrienne LaBranche-Tucker, Hans Otto Wack, Rick Hall, Benjamin Sojka, Ed Crawford, David Crawford, and Cabell Brand. 2009. [https://www.radford.edu/content/dam/departments/administrative/Sustainability/Documents/Rainwater-Manual.pdf Virginia Rainwater Harvesting Manual]. 2nd Edition.  Compiled by The Cabell Brand Center, Salem, VA. See Storage Tanks, Tank Sizing.
 
*Lawson,Sarah, Adrienne LaBranche-Tucker, Hans Otto Wack, Rick Hall, Benjamin Sojka, Ed Crawford, David Crawford, and Cabell Brand. 2009. [https://www.radford.edu/content/dam/departments/administrative/Sustainability/Documents/Rainwater-Manual.pdf Virginia Rainwater Harvesting Manual]. 2nd Edition.  Compiled by The Cabell Brand Center, Salem, VA. See Storage Tanks, Tank Sizing.
*North Carolina Department of Environmental Quality (NC DEQ). April 2014. [https://deq.nc.gov/sw-bmp-manual North Carolina Stormwater BMP Manual]. Rainwater Harvesting. Draft document. See Section 25.4.8 – Section 25.4.11.
+
*North Carolina Department of Environmental Quality (NC DEQ). April 2014. [https://ncdenr.s3.amazonaws.com/s3fs-public/Energy%20Mineral%20and%20Land%20Resources/Stormwater/BMP%20Manual/Ch%2025%20RWH%20Final%20Draft.pdf North Carolina Stormwater BMP Manual]. Rainwater Harvesting. Draft document. See Section 25.4.8 – Section 25.4.11.
 
*Department of Environment and Conservation, New South Wales. April 2006. [http://www.environment.nsw.gov.au/resources/stormwater/managestormwatera06137.pdf Managing Urban Stormwater: Harvesting and Reuse]. Sydney, Australia, ISBN 1 74137 875 3. See Section 6.3.1, Storage Volume.
 
*Department of Environment and Conservation, New South Wales. April 2006. [http://www.environment.nsw.gov.au/resources/stormwater/managestormwatera06137.pdf Managing Urban Stormwater: Harvesting and Reuse]. Sydney, Australia, ISBN 1 74137 875 3. See Section 6.3.1, Storage Volume.
  

Revision as of 12:27, 18 June 2022

Because of the large number of references on the topic of harvest and use, this list of references correspond with the different sections of the harvest and use section of the manual.

Overview

Design process and sequencing

Design feasibility phase

Design phase storage siting

Design

Required Storage Capacity

  • Lawson,Sarah, Adrienne LaBranche-Tucker, Hans Otto Wack, Rick Hall, Benjamin Sojka, Ed Crawford, David Crawford, and Cabell Brand. 2009. Virginia Rainwater Harvesting Manual. 2nd Edition. Compiled by The Cabell Brand Center, Salem, VA. See Storage Tanks, Tank Sizing.
  • North Carolina Department of Environmental Quality (NC DEQ). April 2014. North Carolina Stormwater BMP Manual. Rainwater Harvesting. Draft document. See Section 25.4.8 – Section 25.4.11.
  • Department of Environment and Conservation, New South Wales. April 2006. Managing Urban Stormwater: Harvesting and Reuse. Sydney, Australia, ISBN 1 74137 875 3. See Section 6.3.1, Storage Volume.

Storage Unit

Collection System

Treatment System

  • Metropolitan Council. Fall 2011. Stormwater Reuse Guide. Prepared by Camp Dresser & McKee, Inc. and others. St. Paul, MN. See Toolbox R.4 and I.3 – Treatment
  • Despins, Christopher. September 2012. Guidelines for Residential Rainwater Harvesting Systems Handbook. Canada Mortgage and Housing Corporation (CMHC). ISBN 978-1-100-21183-1. See Chapter 3, Rainwater quality treatment; Table 3-2: Comparison of advantages and disadvantages associated with pre- and post-storage treatment; Table 3.3: Summary of post-storage treatment options (Ontario Guide); and Chapter 3-3: Select and install pre-storage treatment devices.
  • Georgia Department of Community Affairs (DCA). 2009. Georgia Rainwater Harvesting Guidelines. Atlanta, GA. See Section 4.4 and Section 5.3 – Section 5.4.
  • Lawson,Sarah, Adrienne LaBranche-Tucker, Hans Otto Wack, Rick Hall, Benjamin Sojka, Ed Crawford, David Crawford, and Cabell Brand. 2009. Virginia Rainwater Harvesting Manual. Compiled by The Cabell Brand Center, Salem, VA. See Design Guide, First flush diversion and pre-tank filtration - Design Guide, Additional treatment.
  • Macomber, Patricia S. 2010. Guidelines on Rainwater Catchment Systems for Hawaii. College of Tropical Agriculture and Human Resources. University of Hawaii at Manoa. ISBN 1-929325-23-1. See Chapter 4, Water Treatment.
  • North Carolina Department of Environmental Quality (NC DEQ). April 2014. North Carolina Stormwater BMP Manual. Chapter 25, Rainwater Harvesting. Draft document. See Section 25.4.16 and Section 25.4.22.
  • Texas Water Development Board. 2005. The Texas Manual on Rainwater Harvesting. 3rd Edition. Austin, TX. See Chapter 3, Water Quality and Treatment.
  • Despins, Christopher. 2010. Ontario Residential Rainwater Harvesting Guidelines. See Table 3.3: Summary of post-storage treatment options (Ontario Guide).

Distribution System

Makeup Water Supply System & Backflow Prevention

Operation and maintenance

Environmental concerns

Calculating credits