m
m
 
Line 67: Line 67:
 
<sup>4</sup>Landscape architects, plant specialists and project (field) engineers may modify the allowable compost specification ranges based on specific field conditions and plant requirements.''</font size>
 
<sup>4</sup>Landscape architects, plant specialists and project (field) engineers may modify the allowable compost specification ranges based on specific field conditions and plant requirements.''</font size>
  
<noinclude>[[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Erosion prevention]]</noinclude>
+
<noinclude>[[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Erosion prevention]]
 +
[[Category:Level 3 - General information, reference, tables, images, and archives/Tables/Construction stormwater]]
 +
</noinclude>

Latest revision as of 19:08, 4 August 2022

Construction requirements for compost blanket application
Link to this table

Parameters1,4 Reported as (units of measure) Filter Berm to be Vegetated Filter Berm to be left Un-vegetated
pH2 pH units 6.0 - 8.5 N/A
Soluble Salt Concentration2 (electrical conductivity) dS/m (mmhos/cm) Maximum 5 N/A
Moisture Content %, wet weight basis 30 – 60 30 – 60
Organic Matter Content %, dry weight basis 25 – 65 25-100
Particle Size % passing a selected mesh size, dry weight basis
  • 3” (75 mm), 100% passing
  • 1” (25mm), 90% to 100% passing
  • 3/4” (19mm), 70% to 100% passing
  • 1/4” (6.4 mm), 0% to 75% passing Maximum:
  • particle size length of 6” (152mm) (no more than 60% passing 1/4” (6.4 mm) in high rainfall/flow rate situations)
  • 3” (75 mm), 100% passing
  • 1” (25mm), 90% to 100% passing
  • 3/4” (19mm), 70% to 100% passing
  • 1/4” (6.4 mm), 0% to 75% passing Maximum:
  • particle size length of 6” (152mm) (no more than 60% passing 1/4” (6.4 mm) in high rainfall/flow rate situations)
Stability3 Carbon Dioxide Evolution Rate mg CO2-C per g OM per day < 8 N/A
Physical Contaminants (man-made inerts) %, dry weight basis < 1 < 1

1Recommended test methodologies are provided in Test Methods for the Examination of Composting and Compost (TMECC, The US Composting Council)
2Each specific plant species requires a specific pH range. Each plant also has a salinity tolerance rating, and maximum tolerable quantities are known. When specifying the establishment of any plant or turf species, it is important to understand their pH and soluble salt requirements, and how they relate to the compost in use.
3Stability/Maturity rating is an area of compost science that is still evolving, and as such, other various test methods could be considered. Also, never base compost quality conclusions on the result of a single stability/maturity test.
4Landscape architects, plant specialists and project (field) engineers may modify the allowable compost specification ranges based on specific field conditions and plant requirements.

This page was last edited on 4 August 2022, at 19:08.