Difference between revisions of "File:Inlet bad 4.JPG"
File:Inlet bad 4.JPG

Latest revision as of 16:46, 19 December 2022

Inlet protection device is over ½ full of sediment. Sediment should be removed from BMP and BMP should be re-installed and maintained regularly for effectiveness.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	19:04, 3 November 2016		1,600 × 1,200 (1.72 MB)	Mtrojan (talk \| contribs)

You cannot overwrite this file.

File usage

The following page uses this file:

Construction stormwater photo gallery - Storm drain inlet protection

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Canon
Camera model	Canon PowerShot A610
Exposure time	1/400 sec (0.0025)
F Number	f/4
Date and time of data generation	12:24, 1 May 2009
Lens focal length	7.3 mm
Orientation	Normal
Horizontal resolution	180 dpi
Vertical resolution	180 dpi
File change date and time	12:24, 1 May 2009
Y and C positioning	Centered
Exif version	2.2
Date and time of digitizing	12:24, 1 May 2009
Meaning of each component	Y Cb Cr does not exist
Image compression mode	3
APEX shutter speed	8.65625
APEX aperture	4
APEX exposure bias	0
Maximum land aperture	2.96875 APEX (f/2.8)
Metering mode	Pattern
Flash	Flash did not fire, auto mode, red-eye reduction mode
Supported Flashpix version	0,100
Color space	sRGB
Focal plane X resolution	5,653.7102473498
Focal plane Y resolution	5,660.3773584906
Focal plane resolution unit	inches
Sensing method	One-chip color area sensor
File source	Digital still camera

Revision as of 14:14, 10 January 2017 (view source) Mtrojan (talk \| contribs) m ← Older edit		Latest revision as of 16:46, 19 December 2022 (view source) Mtrojan (talk \| contribs) m
Line 1:		Line 1:
	Inlet protection device is over ½ full of sediment. Sediment should be removed from BMP and BMP should be re-installed and maintained regularly for effectiveness.		Inlet protection device is over ½ full of sediment. Sediment should be removed from BMP and BMP should be re-installed and maintained regularly for effectiveness.
		+
		+	[[Category:Level 3 - General information, reference, tables, images, and archives/Images/Sediment control photos]]

Difference between revisions of "File:Inlet bad 4.JPG" File:Inlet bad 4.JPG

Latest revision as of 16:46, 19 December 2022

File history

File usage

Metadata

Difference between revisions of "File:Inlet bad 4.JPG"
File:Inlet bad 4.JPG