Line 25: Line 25:
  
 
==Swales==
 
==Swales==
*Swale layout: [[File:Swale Layout2 (1).pdf]]
+
*Swale layout: [[File:Swale Layout2 (1).pdf|Swale layout]]
 
*Typical dry swale profile section with check dams and draintile: [[File:MIDS Dry Swale Sections-SHEET 1.pdf]]
 
*Typical dry swale profile section with check dams and draintile: [[File:MIDS Dry Swale Sections-SHEET 1.pdf]]
 
*Typical grass channel cross-section without soil amendment: [[File:MIDS Dry Swale Sections-SHEET 2.pdf]]
 
*Typical grass channel cross-section without soil amendment: [[File:MIDS Dry Swale Sections-SHEET 2.pdf]]

Revision as of 20:58, 23 July 2013

Bioretention

Infiltration

Warning: Note that the following diagram for an infiltration trench shows the depth of the trench exceeding the width. This would result in this BMP being classified as a Class V underground injection well. It is HIGHLY RECOMMENDED that the length of the trench be a minimum of two times the depth of the BMP.

Ponds

Sand filters

Swales