Line 24: | Line 24: | ||
==For acceptance of maintenance== | ==For acceptance of maintenance== | ||
− | * | + | Set the following requirements for acceptance of maintenance: |
− | * | + | * minimum percent cover of specified plant species required for each year of the maintenance period; |
− | * | + | * minimum number of species present on the roof each year of the maintenance period; can also specify desired minimum percent cover needed to count as species diversity if desired; |
− | * | + | * maximum percent cover and patch size of weed species (if any); and |
+ | * maximum square foot of bare area allowed each year of the maintenance period. | ||
Vegetation will be replaced with species and densities acceptable by Owner’s Representative anytime vegetated cover requirements are not met during the maintenance period. | Vegetation will be replaced with species and densities acceptable by Owner’s Representative anytime vegetated cover requirements are not met during the maintenance period. |
Because exact maintenance requirements vary from roof to roof, we do not recommend developing maintenance specifications, but recommend developing example maintenance performance requirements, as described below.
Set the following requirements for, for example, 30 days after Substantial Completion, for roofs established using cuttings, pre-grown modules, or mats:
All areas that do not meet Performance Standards 30 days after installation shall be re-planted with original plant species and densities within 14 days of notification unless weather conditions are not suitable for planting as determined by Owner’s Representative.
Set the following requirements for, for example, 30 days after Substantial Completion, for roofs established using plugs, or pots:
All areas that do not meet Performance Standards 30 days after installation shall be re-planted with original plant species and densities within 14 days of notification unless weather conditions are not suitable for planting as determined by Owner’s Representative.
Set the following requirements for acceptance of maintenance:
Vegetation will be replaced with species and densities acceptable by Owner’s Representative anytime vegetated cover requirements are not met during the maintenance period.