The following documents were produced by Barr Engineering as part of the Minimal Impacts Design Standards project.
Contents
Documents for individual BMPs
- File:Final Iron Document.docx
- File:MIDS Pretreatment FINAL.pdf
- File:MIDS Reuse Final.pdf
- File:MIDS Turf Memo FInal.pdf
Information for using the MIDS calculator for individual BMPs, BMPs in series, and lumping BMPs
- File:1 - Bioretention Basin without underdrain.docx
- File:2 - Bioretention Basin with underdrain.docx
- File:3 - Infiltration basin.docx
- File:4 - Green Roof.docx
- File:5 - Permeable pavement.docx
- File:6 - Tree trench system-box.docx
- File:7 - Tree trench system-box with underdrain.docx
- File:8 - Swale Side Slope.docx
- File:9 - Swale Main Channel.docx
- File:10 - Swale Main Channel with underdrain.docx
- File:11 - Wet Swale.docx
- File:12 - Sand Filter.docx
- File:13 - Wetland.docx
- File:14 - Stormwater Pond.docx
- File:15 - Harvest and reuse.docx
- File:16 - Other.docx
Example applications for the MIDS calculator
- File:1 - Bioretention Basin Example.docx
- File:2 - Bioretention Basin with an elevated Underdrain Example.docx
- File:3 - Biofiltration Basin underdrain at bottom.docx
- File:4 - Green Roof Example.docx
- File:5 - Infiltration Basin example.docx
- File:6 - Permeable Pavement example.docx
- File:7- Tree Trench Systme - Box (with out an underdrain).docx
- File:8 - Tree Trench System - Box (with underdrain).docx
- File:9 - Swale Side Slope and Main Channel Example.docx
- File:10 - Swale Side Slope and Wet Swale Example.docx
- File:11 - Sand Filter example.docx
- File:12 - Stormwater Pond.docx
- File:13 - Wetland example.docx
- File:14 - Harvest and reuse - Cistern.docx
- File:15 - Other example.docx
- File:16 - Individual vs Clumping example.docx
- File:17 - BMPs in Series Example.docx
Other documents
File:3 - Performance Curves.docx File:2 - MIDS Calculator Overview.docx File:1 - MIDS Addendum Sections1and2 final.docx File:4 - Calculator User Documentation Version 2.docx