File:Solar panels 1.png

Revision as of 13:12, 24 March 2016 by Mtrojan (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

File:Solar panels 1.png

Rain falls on the solar panel and runs off to the edge of the panel, where it falls vertically at the dripline to the ground below. From there this water can infiltrate or move along the ground surface toward the next panel. The area beneath the panel and between panels consists of pervious soil with well-maintained vegetation. Water falling from a panel can therefore infiltrate from the dripline until it encounters the next dripline, where additional water is supplied from the next panel. Panels can be rotated from the horizontal position. α measures the angle of rotation from the horizontal position. Because the panel rotates, the length Z, which represents the horizontal distance beneath a panel, varies. The average value for Z is given by

\( Z = (COS(α max)H + COS(α min)) / 2 \)

where H is the horizontal length of the panel. Y, which is the pervious length between panels, can vary depending on the angle of panel rotation, so for simplicity of calculations Y should be based on the average value of Z.