Search results
Special:Search

Create the page "Calculating credits for swale" on this wiki! See also the search results found.

Requirements, recommendations and information for using stormwater pond as a BMP in the MIDS calculator
...r constructed pond for MIDS calculator|MIDS calculator symbol for constructed pond.]] ...tershed tab for constructed pond|Screen shot of watershed tab for constructed pond.]]

17 KB (2,658 words) - 19:09, 23 November 2022
Requirements, recommendations and information for using green roofs as a BMP in the MIDS calculator
...MIDS calculator symbol for green roofs|MIDS calculator symbol for green roofs]] For a green roof system, stormwater that is captured and stored within the soil

15 KB (2,424 words) - 14:49, 11 December 2022
Calculating credits for infiltration basin
#REDIRECT [[Calculating credits for infiltration]] ...ign: center;" | '''Recommended pollutant removal efficiencies, in percent, for infiltration BMPs. [http://stormwater.pca.state.mn.us/index.php/Information

37 KB (5,249 words) - 16:07, 18 July 2022
Calculating credits for dry swale (grass swale)
...al_by_BMPs#References Sources]. NOTE: removal efficiencies are 100 percent for water that is infiltrated. ...ected to calculate credits. The model selected depends on your objectives. For compliance with the Construction Stormwater permit, the model must be based

65 KB (9,893 words) - 13:52, 29 December 2022
Requirements, recommendations and information for using swale with an underdrain as a BMP in the MIDS calculator
...0px|thumb|alt=Symbol for swale with underdrain.png|Symbol for Swale main channel (with underdrain) used in the MIDS calculator.]] ...tab for Swale main channel (with underdrain). The user must input a value for impervious area or the BMP will not provide volume and pollutant reduction.

31 KB (4,982 words) - 13:36, 29 January 2023
Calculating credits for stormwater and rainwater harvest and use/reuse
...ign: center;" | '''Recommended pollutant removal efficiencies, in percent, for infiltration BMPs. [http://stormwater.pca.state.mn.us/index.php/Information | colspan="8" style="text-align: center;" |Pollutant removal is 100 percent for the volume that is captured and infiltrated. If captured water is routed to

45 KB (6,471 words) - 21:16, 28 July 2022
Information on pollutant removal by BMPs
...nderdrain|Schematic of pollutant removal mechanisms for a dry swale with an underdrain.]] ...ecific values. To see updates to credits, see the page called [[Updates to credits and pollutant removal values]].

36 KB (5,227 words) - 00:44, 23 January 2023
Calculating credits for infiltration
...ign: center;" | '''Recommended pollutant removal efficiencies, in percent, for infiltration BMPs. [http://stormwater.pca.state.mn.us/index.php/Information | colspan="8" style="text-align: center;" |Pollutant removal is 100 percent for the volume that is captured and infiltrated

42 KB (5,899 words) - 14:22, 26 July 2022
Requirements, recommendations and information for using swale without an underdrain as a BMP in the MIDS calculator
...00px|thumb|alt=symbol for swale with no underdrain|Symbol for Swale main channel (without an underdrain) used in the MIDS calculator.</font siz ...t flow, then a swale side slope BMP should be used in combination with the swale main channel BMP in the MIDS calculator. All pollutants in the infiltrated

33 KB (5,347 words) - 13:38, 29 January 2023
Plants for swales
...t/files/pfsd-section1.pdf “Plants for Stormwater Design: Species Selection for the Upper Midwest”] (Daniel Shaw and Rusty Schmidt, Minnesota Pollution C {{alert|Swales can be an important tool for retention and detention of stormwater runoff. Depending on design and const

33 KB (4,525 words) - 17:15, 8 December 2022
Credits for Better Site design
...water quality volume reduction [[Overview of stormwater credits|stormwater credits]] include ...d is not adjusted. Other options that could be considered include applying credits to Vpp, or proportional application of a credit to both Vpp

44 KB (6,627 words) - 14:13, 6 February 2023
Requirements, recommendations and information for using sand filter as a BMP in the MIDS calculator
...px|thumb|alt=symbol for sand filter in MIDS calculator|Symbol for a sand filter in the MIDS calculator]] ...nd filter in MIDS calculator|Screen shot of the watershed tab for a sand filter in the MIDS calculator]]

15 KB (2,395 words) - 01:30, 23 December 2022
Requirements, recommendations and information for using permeable pavement BMPs in the MIDS calculator
...lculator symbol for permeable pavement|MIDS calculator symbol for permeable pavement.]] ...rmeable pavement|MIDS calculator screen shot of watershed tab for permeable pavement.]]

20 KB (3,173 words) - 18:54, 23 November 2022
Overview for high-gradient stormwater step-pool swale
{{alert|Swales can be an important tool for retention and detention of stormwater runoff. Depending on design and const ...ose to the surface or water does not readily drain out of the swale. A wet swale acts as a very long and linear shallow biofiltration or linear wetland trea

25 KB (3,698 words) - 02:39, 15 December 2022
Requirements, recommendations and information for using underground infiltration BMPs in the MIDS calculator
...Symbol for underground infiltration in MIDS calculator|Symbol for underground infiltration in MIDS calculator]] For an underground infiltration system, all stormwater captured below the outfl

24 KB (3,705 words) - 19:11, 23 November 2022
Design criteria for wet swale (wetland channel)
...e:Wet swale section.png|300px|thumb|alt=wet swale section|Wet swale section.]] {{alert|Swales can be an important tool for retention and detention of stormwater runoff. Depending on design and const

25 KB (3,758 words) - 17:15, 29 December 2022
Construction specifications for dry swale (grass swale)
{{alert|Dry swales can be an important tool for retention and detention of stormwater runoff. Depending on design and const This page provides a discussion of construction specifications for dry swales ([https://stormwater.pca.state.mn.us/index.php?title=Glossary#I

22 KB (3,332 words) - 20:46, 27 December 2022
Operation and maintenance of swales - supplemental information
...kes city hall.jpg|300px|thumb|alt=Image of a swale|Image of a swale at Lino Lakes city hall]] {{alert|Swales can be an important tool for retention and detention of stormwater runoff. Because they utilize vegetati

27 KB (4,015 words) - 21:34, 24 January 2023
Requirements, recommendations and information for using bioretention with no underdrain BMPs in the MIDS calculator
...g|thumb|300px|alt=MIDS symbol for bioinfiltration|Symbol used for Bioretention basin (without underdrain) (bioinfiltration) in the MIDS calcu {{alert|[https://youtu.be/B1EkwU3EK3Y See video for using this BMP]|alert-info}}

23 KB (3,549 words) - 18:50, 23 November 2022
Calculating credits for permeable pavement
...ces Sources]. NOTE: removal efficiencies are 100 percent of captured water for systems with no underdrain'''. ...ected to calculate credits. The model selected depends on your objectives. For compliance with the Construction Stormwater permit, the model must be based

58 KB (8,708 words) - 02:30, 15 December 2022

Search results Special:Search

Search results
Special:Search