BMPs for stormwater infiltration Revision as of 21:14, 26 May 2015 by Mtrojan (talk | contribs)(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff) Green roofs > BMPs for stormwater infiltration

Best Management Practices that infiltrate stormwater runoff into underlying soil include, but are not limited, to

• infiltration basins,
• infiltration trenches,
• underground infiltration,
• bioinfiltration,
• permeable pavements, and
• tree trenches and tree boxes.

These are discussed briefly below.

Infiltration basin

Photo of an infiltration basin. Source: Clark County, Washington, with permission.

Applications and treatment capabilities for infiltration basins
Applications		Treatment capabilities3, 4, 5
Residential	yes	TSS	High6
Commercial	Yes	TN	Medium/high
Ultra-urban	Limited1	TP	Medium/high
Industrial	Yes2	Chloride	Low
Highway/road	Limited	Metals	High
Recreational	Yes	Oils and grease	High
		Pathogens	High
1 Due to a size restriction; 2 Unless the infiltration practice is located in an industrial area with exposed significant materials or from vehicle fuelling and maintenance areas. Infiltration BMPs are PROHIBITED in these areas; 3Underground infiltration systems will have different pollutant removal capabilities than what is provided in this table. These systems may have a wider application range, however, there is concern that they do not provide adequate treatment of the pollutants; 4 This is only for the portion of flow that enters the infiltration basin; by-passed runoff does not receive treatment; 5 Low = < 30%; Medium = 30-65%; High = 65 -100%); 6 Assumes adequate pre-treatment Sources: Schueler, 1987, 1992; USEPA 1993a, 1993b; Maniquiz et al., 2010; NPRPD, 2007; California Stormwater Manual, 2009; Pennsylvania Stormwater Manual, 2006

An infiltration basin is a natural or constructed impoundment that captures, temporarily stores, and infiltrates a design volume of water. For more information, see the following pages in this Manual.

• Overview for Infiltration basin
• Design criteria for Infiltration basin
• Construction specifications for Infiltration basin
• Operation and maintenance of Infiltration basin
• Cost-benefit considerations for Infiltration basin
• Calculating credits for infiltration basin
• External resources for Infiltration basin
• References for Infiltration basin
• Requirements, recommendations and information for using infiltration basin/underground infiltration BMPs in the MIDS calculator

Infiltration trench

Photo of a Infiltration trench in Lino Lakes

Applications and treatment capabilities for infiltration trenches
Applications		Treatment capabilities3, 4
Residential	yes	TSS	High5
Commercial	Yes	TN	Medium/high
Ultra-urban	Limited1	TP	Medium/high
Industrial	Yes2	Chloride	Low
Highway/road	Yes	Metals	High
Recreational	Yes	Oils and grease	High
		Pathogens	High
1 Due to a size restriction; 2 Unless the infiltration practice is located in an industrial area with exposed significant materials or from vehicle fuelling and maintenance areas. Infiltration BMPs are PROHIBITED in these areas; 3 This is only for the portion of flow that enters the infiltration basin; by-passed runoff does not receive treatment; 4 Low = < 30%; Medium = 30-65%; High = 65 -100%); 5 Assumes adequate pre-treatment Sources: Schueler, 1987, 1992; USEPA 1993a, 1993b; Maniquiz et al., 2010; NPRPD, 2007; California Stormwater Manual, 2009; Pennsylvania Stormwater Manual, 2006

An infiltration trench is a shallow excavated trench that is backfilled with a coarse stone aggregate allowing for the temporary storage of runoff in the void space of the material in addition to the storage above the aggregate within the trench. For more information, see the following pages in this Manual.

• Overview for Infiltration trench
• Design criteria for Infiltration trench
• Construction specifications for Infiltration trench
• Operation and maintenance of Infiltration trench
• Cost-benefit considerations for Infiltration trench
• Calculating credits for infiltration trench
• External resources for Infiltration trench
• References for Infiltration trench
• Requirements, recommendations and information for using infiltration basin/underground infiltration BMPs in the MIDS calculator

Bioinfiltration basin

Bioinfiltration basin (Source: CDM Smith)

Applications and treatment capabilities for bioinfiltration basins
Applications		Treatment capabilities2, 3, 4
Residential	yes	TSS	High5
Commercial	Yes	TN	Low/Medium5
Unltra-urban	Limited	TP	Medium/high6
Industrial	Yes1	Chloride	Low
Highway/road	Yes	Metals	High
Recreational	Yes	Oils and grease	High
		Pathogens	High
1 Unless the infiltration practice is located in an industrial area with exposed significant materials or from vehicle fuelling and maintenance areas. Infiltration BMPs are PROHIBITED in these areas; 2 This is only for the portion of flow that enters the infiltration basin; by-passed runoff does not receive treatment; 3 Low = < 30%; Medium = 30-65%; High = 65 -100%); 4 Assumes adequate pre-treatment; 5 This assumes no raised underdrain; 6 Certain soil mixes can actually leach P. Sources: EPA Factsheet, 1999; Davis et al., 2001, 2003, 2006; Hsieh and Davis, 2005; Hong et al., 2006; Hunt et al., 2006; NPRPD, 2007; Li and Davis, 2009; Diblasi et al., 2009; Passeport et al., 2009; Brown et at., 2011a, b; Komlos et al., 2012; Denich et al., 2013; Li and Davis, 2013; California Stormwater BMP

Bioinfiltration basins, often called rain gardens, use soil (typically engineered media or mixed soil) and native vegetation to capture runoff and remove pollutants. Both the media and underlying soil typically have high infiltration rates that allow captured water to infiltrate within a required drawdown time, usually 48 hours. For more information, see the following pages in this Manual.

• Bioretention terminology (including types of bioretention)
• Overview for bioretention
• Design criteria for bioretention
• Construction specifications for bioretention
• Operation and maintenance of bioretention
• Cost-benefit considerations for bioretention
• Calculating credits for bioretention
• Soil amendments to enhance phosphorus sorption
• Summary of permit requirements for bioretention
• Supporting material for bioretention
• External resources for bioretention
• References for bioretention
• Requirements, recommendations and information for using bioretention with no underdrain BMPs in the MIDS calculator

Permeable pavement

Permeable pavement (Source: CDM Smith)

Applications and treatment capabilities for permeable pavement
Applications		Treatment capabilities2, 3, 4
Residential	yes	TSS	High
Commercial	Yes	TN	Medium/High5
Ultra-urban	Yes	Nitrate	Low/Medium
Industrial	Yes1	TP	Medium/High
Retrofit	Yes	Chloride	Low
Highway/road	Yes	Metals	High
Recreational	Yes	Oils and grease	High
		Pathogens	5
1 Unless the infiltration practice is located in an industrial area with exposed significant materials or from vehicle fuelling and maintenance areas. Infiltration BMPs are PROHIBITED in these areas; 2 This is only for the portion of flow that enters the infiltration basin; by-passed runoff does not receive treatment; 3 Low = < 30%; Medium = 30-65%; High = 65 -100%); 4 Assumes adequate pre-treatment; 5 Insufficient information Source: Schueler, 1987; Pratt et al, 1999; Adams, 2003; Brattebo and Booth, 2003; Adams, 2003; Bean et al, 2007; SEMCOG, 2008; International Stormwater Database, 2012

Permeable pavements allow stormwater runoff to pass through surface voids into an underlying stone reservoir/ subbase for temporary storage and/or infiltration. They are suitable for driveways, trails, parking lots, and roadways with lighter traffic. For more information, see the following pages in this Manual.

• Overview for permeable pavement
• Types of permeable pavement
• Design criteria for permeable pavement
• Construction specifications for permeable pavement
• Assessing the performance of permeable pavement
• Operation and maintenance of permeable pavement
• Calculating credits for permeable pavement
• Additional considerations for permeable pavement
• Links for permeable pavement
• References for permeable pavement
• Requirements, recommendations and information for using permeable pavement BMPs in the MIDS calculator

Tree box/Tree trench

Tree box (Source: CDM Smith)

Applications and treatment capabilities for tree box/tree trench
Applications		Treatment capabilities2, 3, 4
Residential	yes	TSS	High
Commercial	Yes	TN	Low/Medium5
Ultra-urban	Yes	TP	Medium/High
Industrial	Yes1	Chloride	Low
Highway/road	No	Metals	High
Recreational	Yes	Oils and grease	High
		Pathogens	High
1 Unless the infiltration practice is located in an industrial area with exposed significant materials or from vehicle fuelling and maintenance areas. Infiltration BMPs are PROHIBITED in these areas; 2 This is only for the portion of flow that enters the infiltration basin; by-passed runoff does not receive treatment; 3 Low = < 30%; Medium = 30-65%; High = 65 -100%); 4 Assumes adequate pre-treatment; 5 Insufficient information Source: see [1]

Tree trenches and tree boxes (collectively called tree BMPs), consist of trees planted within underground storage reservoirs designed to retain a volume of runoff for the purpose of uptake by trees. They are a variant of bioretention BMPs. For more information, see the following pages in this Manual.

Trees - general

• Overview for trees
• Types of tree BMPs
• Plant lists for trees
• Street sweeping for trees
• References for trees
• Supporting material for trees

Tree boxes/tree trenches

• Design guidelines for tree quality and planting - tree trenches and tree boxes
• Design guidelines for soil characteristics - tree trenches and tree boxes
• Construction guidelines for tree trenches and tree boxes
• Protection of existing trees on construction sites
• Operation and maintenance of tree trenches and tree boxes
• Assessing the performance of tree trenches and tree boxes
• Calculating credits for tree trenches and tree boxes
• Case studies for tree trenches and tree boxes
• Soil amendments to enhance phosphorus sorption
• Fact sheet for tree trenches and tree boxes
• Requirements, recommendations and information for using trees as a BMP in the MIDS calculator