Evaluate the effectiveness of actions

After the Storm

When snow and ice control operations have ended after the storm, evaluate what was done, what worked, and what could be changed to improve operations.

  • Have an after-the-storm discussion with the maintenance crew.
  • Have an after-the-storm discussion with the property manager.
  • Consider the environmental impacts caused by deicer/abrasive use.
  • Based on all aspects of the storm fighting experience, look for ways to improve practices.
  • Clean and check all equipment.
  • At the end of the season, clean and maintain the truck, tanks, brine-making systems, and pumps according to manufacturer specifications.
  • Do not use deicers at the end of the season just to use them up. Save them for next year. Place all piles on an impervious pad and cover them. This includes salt and salt/sand mixes.
  • If there is no place for year round storage, contact the city, they may be willing to purchase it, take it, or store it. Everyone benefits from good storage and less salt in our water.

Tip: Save extra salt at the end of the season. Do not apply just to get rid of it.

Documenting and charting

Good documentation leads to reduced use of materials, more effective snow and ice control, reduced environmental impacts, and cost savings.

  • Without documention and charts, there is no measurement of performance.
  • Track the material use. Learn to record what and how much is applied at each site, from each visit. Be prepared to analyze and make adjustments to the process based on what is learned.
  • Use forms like those shown below to record and track the work and observations.
This chart shows the process of Fine-tuning the program
The process of Fine-tuning the program


Information:' dollar symbol There is no management of what is not measured.
Information: dollar symbol Following Best Practices and documenting actions will help prove the professional is doing the best job possible and may reduce liability.

Anti-icing data form
Link to this table

Location:
Date:
Air temperature Pavement temperature Relative humidity Dewpoint Sky - cloud cover
Reason for applying:
Location:
Chemical:
Application Time:
Application Amount
Observation (after event):
Observation (efore next event):
Name:



Documentation form for deicing