Step 3 Calibration Chart for auger or conveyor systems
Step 3 Calibration Chart for auger or conveyor systems
Link to this table
| Date: August 8, 2015 | |||||
| Spreader #: A4219 | |||||
| Material: Rock salt | |||||
| Setting | Pounds per minute | 5 mph (X12) | 10 mph (X6) | 15 mph (X4) | 20 mph (X3) |
|---|---|---|---|---|---|
| 1 | 10 | 1201 | 60 | 40 | 30 |
| 2 | |||||
| 2 | 22 | 264 | 132 | 88 | 66 |
| 3 | 34 | 408 | 204 | 136 | 102 |
1top half of each row = lbs/lane mile. To get this number, multiply lbs/min by the factor shown for each speed
2bottom half of each row = lbs/1000 sq ft. To find this, divide the number in the top half by 63