Step 4 Calibration Chart for auger or conveyor systems
Step 4 Calibration Chart for auger or conveyor systems
Link to this table
| Date: August 8, 2015 | Spreader #: A4219 | Material: Rock salt | |||||||||||||||
| Setting | Pounds per minute | 5 mph (X12) | 10 mph (X6) | 15 mph (X4) | 20 mph (X3) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 10 | * 120 | 60 | 40 | 30 | ||||||||||||
| **1.9 | 1.0 | 0.6 | 0.5 | ||||||||||||||
| 2 | 22 | 264 | 132 | 88 | 66 | ||||||||||||
| 4.2 | 2.1 | 1.4 | 1.0 | ||||||||||||||
| 3 | 34 | 408 | 204 | 136 | 102 | ||||||||||||
| 6.5 | 3.2 | 2.2 | 1.6 | ||||||||||||||
*top half of each row = lbs/lane mile. To get this number, multiply lbs/min by the factor shown for each speed
**bottom half of each row = lbs/1000 sq ft. To find this, divide the number in the top half by 63