Step 4 Calibration Chart for auger or conveyor systems Revision as of 13:39, 29 February 2016 by Mtrojan (talk | contribs)(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff) Step 4 Calibration Chart for auger or conveyor systems

Step 4 Calibration Chart for auger or conveyor systems
Link to this table

Date: August 8, 2015
Spreader #: A4219
Material: Rock salt
Setting	Pounds per minute	5 mph (X12)	10 mph (X6)	15 mph (X4)	20 mph (X3)
1	10	1201	60	40	30
		1.92	1.0	0.6	0.5
2	22	264	132	88	66
		4.2	2.1	1.4	1.0
3	34	408	204	136	102
		6.5	3.2	2.2	1.6

¹ Top half of each row = lbs/lane mile. To get this number, multiply lbs/min by the factor shown for each speed
²bottom half of each row = lbs/1000 sq ft. To find this, divide the number in the top half by 63