Category:Level 3 - General information, reference, tables, images, and archives/Images/Schematic - Simple Estimator

Screen shot of Section 1 of the Estimator.

The MPCA Estimator spreadsheet presents a calculator approach to computing pollutant loading and the pollutant load reduction for total phosphorus (TP) and total suspended solids (TSS)(Note: the Estimator may not be used for any other pollutants). For MS4 permittees reporting on TMDL wasteload allocations (WLAs), results from the Estimator can be used in the Cumulative reductions tab of the Annual Report form. The Estimator applies load reductions to specific structural stormwater BMPs but can be used to estimate reductions associated with other BMPs such as street sweeping, impervious surface disconnection, and changes in land use. It is a simplistic tool and should not be used for modeling a stormwater system or selecting BMPs.

This page provides links to pages that provide information related to the MPCA Simple Estimator

Media in category "Level 3 - General information, reference, tables, images, and archives/Images/Schematic - Simple Estimator"

The following 15 files are in this category, out of 15 total.

Estimator 2.png 1,241 × 737; 379 KB
Estimator default Figure 1a.png 1,462 × 752; 22 KB
Estimator default Figure 2.png 2,147 × 1,169; 65 KB
Estimator default screen shot.png 1,149 × 661; 282 KB
Estimator section 1 a.png 1,027 × 584; 178 KB
Estimator section 3.png 1,769 × 741; 373 KB
Estimator summary 2.png 1,388 × 445; 243 KB
Example step 1.png 1,028 × 440; 160 KB
Example step 1B.png 1,026 × 552; 242 KB
Example step 1C.png 1,026 × 590; 245 KB
Example Step 2.png 1,437 × 1,107; 141 KB
Example step 2A.png 1,027 × 416; 208 KB
Example step 2B.png 1,027 × 508; 294 KB
Example step 2C.png 1,028 × 503; 292 KB
Example step 3b.png 1,132 × 1,017; 133 KB