American Association of State highway and Transportation Officials (AASHTO). 1993. Guide for Design of Pavement Structures, American Association of State Highway and Transportation Officials, Washington, DC.
American Concrete Paverment Association ACPA 2010. PerviousPave Technical Guidance. American Concrete Pavement Association. Chicago, IL.
California Stormwater Quality Association [1]. 2003. California Stormwater BMP Handbook. New Development and Redevelopment.
Erickson, A.J. and Gulliver, J.S. Performance Assessment of an Iron-Enhanced Sand Filtration Trench for Capturing Dissolved Phosphorus. Project Report No. 549. St. Anthony Falls Laboratory. University of Minnesota. Minneapolis, Minnesota. Prepared for the City of Prior Lake, Minnesota.
Hansen 2008, Hansen, K., Porous Asphalt Pavements for Stormwater Management. [http://www.asphaltpavement.org/ National Asphalt Pavement Association, Information Series 131, Lanham, Maryland.
Leming, M. L., Malcom, H. R., and Tennis, P. D.. 2007. Hydrologic Design of Pervious Concrete. EB303. Portland Cement Association, Skokie, Illinois, and National Ready Mixed Concrete Association, Silver Spring, Maryland.
MAPA 2012. “Guidance Specification for Porous or Dense-Graded Hot-Mix Asphalt Pavement Structures for Storm Water Management,” Minnesota Asphalt Pavement Association, New Brighton, MN. January 3, 2012.
Minnesota Department of Transportation. 2005. MnDOT Standard Specifications Book. Division III – Materials. Minnesota Department of Transportation. St. Paul, Minnesota.
United States Environmental Protection agency (USEPA). 2008. June 13, 2008 Memo. L. Boornaizian and S. Heare. Clarification on which stormwater infiltration practices/technologies have the potential to be regulated as “Class V” wells by the Underground Injection Control Program. Water Permits Division and Drinking Water Protection Division. Washington, D.C.