CADD images for individual best management practices
Bioretention
- General plan: File:Bioretention CADD Details GEN PLAN (1).pdf
- Infiltration filtration recharge: File:Bioretention CADD Details infil-filtration-recharge (1).pdf
- Infiltration recharge: File:Bioretention CADD Details INFILTRATION RECHARGE FACILITY (1).pdf
- Infiltration partial recharge: File:Bioretention CADD Details infiltration-partial recharge (1).pdf
- Filtration: File:Bioretention CADD Details filtration -pollution (1).pdf
Infiltration
- Infiltration basin plan and profile: File:Infiltration Basin INFILTRATION BASIN PLAN & PROFILE (1).pdf
- Infiltration subsurface layout: File:Infiltration Subsurface Layout2 (1).pdf
Warning: Note that the following diagram for an infiltration trench shows the depth of the trench exceeding the width. This would result in this BMP being classified as a Class V underground injection well. It is HIGHLY RECOMMENDED that the length of the trench be a minimum of two times the depth of the BMP.
- Infiltration trench section: File:INFILTRATION TRENCH INFILTRATION TRENCH SECTION (1).pdf
Ponds
- Detention pond plan and profile: File:PONDS DETENTION SHALLOW PLAN & PROFILE (1).pdf
- Pond outlet details: File:PONDS OUTLET DETAILS (1).pdf
- Pond plan and profile: File:PONDS POND PLAN & PROFILE (1).pdf
- Shallow wetland plan and profile: File:PONDS SHALLOW WETLAND PLAN & PROFILE (1).pdf
Sand filters
- Perimiter sand filter details: File:Perimeter Sand Filter PERIMETER SAND FILTER DETAILS (1).pdf
- Surface sand filter: File:SURFACE Sand Filter3 Surface sand filter (1).pdf
- Underground sand filter: File:UNDERGROUND SAND FILTER Layout2 (1).pdf
Swales
- Swale layout: File:Swale Layout2 (1).pdf
- Typical dry swale profile section with check dams and draintile: File:MIDS Dry Swale Sections-SHEET 1.pdf
- Typical grass channel cross-section without soil amendment: File:MIDS Dry Swale Sections-SHEET 2.pdf