check it out image
Check out this video on using biochar to rebuild urban soils or this video on making biochar
Page summary - biochar
Biochar is a charcoal-like substance that’s made by burning organic material such as crop residues; yard, food and forestry wastes; and animal manures. Beneficial properties of biochar include the following.
  • enhancing soil structure and soil aggregation;
  • increasing water retention;
  • decreasing acidity;
  • reducing nitrous oxide emissions;
  • improving porosity;
  • regulating nitrogen leaching;
  • improving electrical conductivity; and
  • improving microbial properties.

Regarding water quality, additional research is needed, but generally:

  • biochar does not appear to retain phosphorus;
  • biochar does not leach phosphorus;
  • biochar appears to be effective at retaining bacteria, particularly fine-grained biochars;
  • biochar is effective at retaining nitrogen;
  • biochar is effective at retaining metals; and
  • biochar is effective at retaining many organics.

Biochar is also found to be beneficial for composting.

This page provides information on biochar. While providing extensive information on biochar, there is a section focused specifically on stormwater applications for biochar.

Overview and description

Biochar is a charcoal-like substance that’s made by burning organic material from biomass. The two most common proceesses for producing biochar are pyrolysis and gasification. During pyrolysis, the organic material is heated to 250-800oC in a limited oxygen environment. Gasification involves temperatures greater than 700oC in the presence of oxygen.

Biomass waste materials appropriate for biochar production include crop residues (both field residues and processing residues such as nut shells, fruit pits, bagasse, etc); yard, food and forestry wastes; and animal manures. Clean feedstocks with 10 to 20 percent moisture and high lignin content are recommended. Examples are field residues and woody biomass. Using contaminated feedstocks, including feedstocks from railway embankments or contaminated land, can introduce toxins into the soil, drastically increase soil pH and/or inhibit plants from absorbing minerals. The most common contaminants are heavy metals—including cadmium, copper, chromium, lead, zinc, mercury, nickel and arsenic, and polycyclic aromatic hydrocarbons (PAHs).

Biochar is black, highly porous, lightweight, fine-grained and has a large surface area. Approximately 70 percent of its composition is carbon. The remaining percentage consists of nitrogen, hydrogen and oxygen among other elements. Biochar’s chemical composition varies depending on the feedstocks used to make it and methods used to heat it.

Biochar benefits for soil may include but are not limited to

  • enhancing soil structure and soil aggregation;
  • increasing water retention;
  • decreasing acidity;
  • reducing nitrous oxide emissions;
  • improving porosity;
  • regulating nitrogen leaching;
  • improving electrical conductivity; and
  • improving microbial properties.

Biochar is also found to be beneficial for composting, since it reduces greenhouse gas emissions and prevents the loss of nutrients in the compost material. It also promotes microbial activity, which in turn accelerates the composting process. Plus, it helps reduce the compost’s ammonia losses, bulk density and odor (Spears, 2018; Hoffman-Krull, 2019).

Applications for biochar in stormwater management

Biochar has several potential applications for stormwater management.

  • Biochar increases water holding capacity of soil, improves aggregation in fine-textured soils, increases saturated hydraulic conductivity (k) in fine- and medium-textured soils, and decreases hydraulic conductivity in very coarse-textured soils.
  • Improves the fertility of nutrient-poor soils. In nutrient-poor soils, biochar appears to consistently improve nutrient cycling and availability for plants. Results for other soils are mixed and depend on the biochar and soil characteristics.
  • Biochar generally improves retention of metals and PAHs.
  • Results for bacteria and pathogens are mixed, but some studies indicate increased retention, primarily associated with straining resulting from increased surface area and micropore structure in biochar-amended soils.
  • Biochar is likely to have limited effects on phosphorus retention unless specifically amended to retain phosphorus.

Possible implications for stormwater management include the following.

  1. Engineered media. Biochar incorporated into engineered media can increase water retention and infiltration. Low-nutrient biochars (e.g. wood-based versus manure- or sludge-based) produced at relatively low temperatures (less than 600oC) can improve phosphorus retention. Biochar may enhance nutrient cycling and improve fertility in media with relatively low nutrient concentrations (e.g. media mixes having lower fractions of compost).
  2. Contaminant hotspots. Biochar can be incorporated into treatment practices in areas with high or potentially high concentrations of metals and organic pollutants.
  3. Turf amendment/soil compaction. Biochar can be added to turf or compacted media to improve hydraulic performance and nutrient cycling.
  4. Filtration practices. Biochar can be used alone or mixed with other components for stormwater filtration applications, including but not limited to the following:
    1. filtration media in new treatment systems, especially roof downspout units and aboveground vaults;
    2. Supplemental or replacement media in existing treatment systems such as sand filters;
    3. Direct media addition to a stormwater storage vault ;
    4. Direct application in bioretention or swale systems;
    5. Filtration socks and slings;
    6. Hanging filters in catch basins.
  5. Underground infiltration basins and trenches. Many underground infiltration practices are constructed in very coarse textured soils that may have limited ability to retain pollutants. Biochar can reduce infiltration rates and adsorb pollutants in these systems.
  6. Climate-related effects. While not specifically a stormwater objective, biochar incorporated into stormwater practices can sequester carbon and reduce nitrous oxide emissions.

Potential biochar stormwater applications (adapted from Table 6 in Mohanty et al. (2018)).
Link to this table

Practice Potential benefits of biochar
Downspout filter boxes
  • Contaminant removal
  • Support plant growth
  • Retain water
  • Slowly release nutrients
Tree boxes
  • Contaminant removal
  • Retain water
  • Slowly release nutrients
Green roofs
  • Retain water
  • Slowly release nutrients
  • Low weight geomedia
  • Contaminant removal
  • Support plant growth
  • Retain water
  • Slowly release nutrients
Constructed ponds and wetlands
  • Contaminant removal
  • Slowly release nutrients
Sand filters
  • Contaminant removal, particularly metals and organics
Level spreader/filter strips
  • Contaminant removal
  • Retain water
  • Slowly release nutrients
  • Contaminant removal
  • Retain water
  • Slowly release nutrients
Infiltration trench/basin
  • Improve hydraulic properties
  • Contaminant removal, particularly metals and organics

Recommended reading

Effects of feedstock and production temperature

Although the basic structure of all biochars is similar, the physical-chemical properties of biochar varies with the source material and with the temperature used in production.

Effect of feedstock (source material)

Since a wide variety of organic material can be used to produce biochar, it is not feasible to discuss each material separately. We provide the following general conclusions. Literature used to develop these conclusions is provided at the end of this section.

  • Compared to wood derived biochar, non-wood feedstock such as grass, sludge, and manure yields biochar with fewer aromatic but more aliphatic groups and higher ash content. Greater concentrations of aliphatic compounds are associated with more reactive biochar.
  • Manure- and sludge-based biochar contains higher concentration of nutrients than wood-based biochar and are therefore more likely to be a source of nutrient leaching.
  • Manure- and sludge-based biochar attenuate metals more than wood based biochars
  • Biochar parameters most affected by feedstock properties are total organic carbon, fixed carbon, and mineral elements of biochar. Feedstocks such as sawdust, wheat straw, and peanut shell have higher carbon concentrations than feedstocks such as manure, sludges, and waste paper.
  • Capacity for carbon sequestration is primarily affected by feedstock, with higher carbon compounds having greater sequestration capacity.
  • High ash biochars, such as manures and coffee husk, exhibit higher cation exchange capacity, which may increase nutrient capture, although high initial nutrient concentrations may offset this and even contribute to nutrient loss.

The International Biochar Initiative (see Appendix 6) provides a classification system for biochar feedstocks, shown below.

  • Unprocessed Feedstock Types
    • Rice hulls & straw
    • Maize cobs & stover
    • Non-maize cereal straws
    • Sugar cane bagasse & trash
    • Switch grass, Miscanthus & bamboo
    • Oil crop residues e.g., sugar beet, rapeseed
    • Leguminous crop residues e.g., soy, clover
    • Hemp residues
    • Softwoods (coniferous)
    • Hardwoods (broadleaf)
  • Processed Feedstock Types
    • Cattle manure
    • Pig manure
    • Poultry litter
    • Sheep manure
    • Horse manure
    • Paper mill sludge
    • Sewage sludge
    • Distillers grain
    • Anaerobic digester sludge
    • Biomass fraction of MSW – woody material
    • Biomass fraction of MSW – yard trimmings
    • Biomass fraction of MSW – food waste
    • Food industry waste


  • Zhaoa et al. (2013) examined cow manure, pig manure, shrimp hull, bone dregs, wastewater sludge, waste paper, sawdust, grass, wheat straw, peanut shell, Chlorella, and water weeds
  • Domingues et al., (2017) examined wood-based biochars (eucalyptus sawdust, pine bark), sugarcane bagasse, chicken manure, and coffee husk
  • Jindo et al. (2014) examined rice husk, rice straw, apple tree wood chips, and oak tree wood chips
  • Mohanty et al. (2018) provide an extensive discussion and literature review of different feedstocks and associated biochar properties
  • Gai et al. (2014) studied twelve biochars produced from wheat straw, corn straw, and peanut shell
  • International Biochar Initiative provide a general discussion of feedstocks
  • Conz et al. (2017) studied poultry litter, sugarcane straw, rice hull and sawdust
  • Jahromi and Fulcher studied biosolids and green waste, corn straw and rice straw, gasifed rice hulls, hardwood, pelleted agricultural or forestry residues, switchgrass, and timber harvest residues
  • Zhao et al. (2017) studied sewage sludge, agriculture biomass waste, and wood biomass waste

Effect of production temperature

Changes in the properties of biochar result from loss of volatile organic matter as temperature increases. This leads to a gradual loss in the number of functional groups on the biochar and increased aromaticity as temperature increases.

In general, the following conclusions are applicable for biochar used in stormwater applications.

  • If retention of nutrients and most pollutants is desired, biochars produced at temperatures less than 600oC should be selected
  • If the goal is to improve soil physical or hydraulic properties biochars produced at temperatures greater than 600oC should be selected

The following information comes from a literature review of the effects of production temperature on biochar

  • Biochar yield and contents of N, hydrogen and oxygen decrease as pyrolysis temperature increases from 400˚C to 700˚C
  • pH and contents of ash and carbon increase with greater pyrolysis temperature.
  • Particle size and porosity increase with greater pyrolysis temperature.
  • Hydrophobicity increases with greater pyrolysis temperature.


  • Mohanty et al., (2018)
  • Zhaoa et al., (2013)
  • Klasson, (2017)
  • Zhao et al., (2017)
  • Jindo et al., (2014)
  • Wang et al., (2018)
  • Rimena et al., (2017)
  • Lyu et al. (2016)
  • Gai et al.. (2014)
  • Conz et al. (2017)

Properties of biochar

This section includes a discussion of chemical and physical properties of biochar, and potential contaminants in biochar, .

Chemical-physical properties of biochar

The properties of biochar vary depending on the feedstock and production temperature, as discussed above. Consequently there is considerable variability in the chemical and physical properties of different biochars. The table below summarizes data from our literature review. Some conclusions from the literature are summarized below.

  • Biochar has a large surface area.
  • Cation exchange capacity (CEC) decreases as pyrolysis temperature increases. This is due to the loss of volatile organic content and associated functional groups as temperature increases. As CEC decreases, the ability of biochar to retain negatively charged chemicals, such as phosphate, decreases.
  • Non-wood vegetative feedstocks have a greater CEC than wood feedstocks. This is due to a greater percentage of aliphatic compounds and associated functional groups. Non-wood feedstocks primarily consist of grasses.
  • Sludges and manure-based biochars have high nutrient content and are thus not satisfactory for managing stormwater

Chemical and physical properties of biochar.
Link to this table

Property Range found in literature1 Median value from literature
Total phosphorus (%) 0.0061 - 1.086 0.0618
Total nitrogen (%) 1.2 - 2.4 0.88
Total potassium (%) 0.0079 - 1.367 0.181
Total carbon (%) 24.2 - 90.9 66
Total hydrogen (%) 0.67 - 4.3 2.8
Total oxygen (%) 2.69 - 28.7 16.3
pH 6.43 - 10.4 9.66
Cation exchange capacity (cmol/kg) 0.1 - 562 43.1
Surface area (m2/g 2.78 - 203 30.6
Electrical conductivity (μs/cm) 100 - 2221 231.5
Pore volume (cm3/g) 0.006 - 0.51 0.036
Total calcium (%) 0.0954 - 3.182 0.590
Total magnesium (%) 0.0297 - 0.2801 0.0587
Total copper (%) 0.0001 - 0.0078 0.00025
Total zinc (%) 0.0002 - 0.0152 0.00135
Total aluminum (%) 0.001 - 0.1929 0.0290
Total iron (%) 0.0009 - 0.2209 0.0333
Total manganese (%) 0.0001 - 0.1025 0.00145
Total sulfur (%) 0.01 - 0.44 0.05
Primary references for this data:
  • Gai et. al, 2014
  • Krishna et al., 2014
  • Yaoa et al., 2011
  • Zhaoa et al., 2013
  • Rimena et al., 2017
  • Jindo et al., 2014

Potential contaminants in biochar

Potential contaminants associated with biochar are a function of the source material and production temperature. Of greatest concern are metals and polycyclic aromatic hydrocarbons (PAHs). Oleszcuk et al. (2013) examined metal and PAH concentrations in four biochars (elephant grass, coconut shell, wicker, and wheat straw). Metal concentrations (mg/kg) in the biochars are summarized below. Tier 1 Soil Reference Values (SRVs) are included in parentheses.

  • Cd: 0.04-0.87 (25)
  • Cu: nd-3.81 (100)
  • Ni: nd-9.95 (560)
  • Pb: 20.6-23.7 (300)
  • Zn: 30.2-102.0 (8700)
  • Cr: nd-18.0 (44,000 for CrIII; 87 for CrVI)

Concentrations in biochar are well below Tier 1 SRVs.

In the study by Oleszcuk et al. (2013), total PAHs ranged from 1,124.2 ng/g to 28,339.1 ng/g. The dominant group of PAHs were 3-ring compounds which comprised 64.6% to 82.6% of total PAHs content. The primary compounds included, in order of abundance, phenanthrene, fluorene, anthracene, and pyrene. No 6-ring PAHs were observed. Concentrations of PAHs and other organic contaminants, such as dioxins, decreases with increasing pyrolysis temperature (Lyu et al., 2016).

In general, biochars mixed with soil do not inhibit germination or root growth. Biochar may enhance soil fertility by providing nutrients or more commonly by slowing the release of nutrients from materials such as compost. was observed. Toxic effects have been observed for some invertebrates, indicating that in sensitive environments, biochar testing is advisable (Oleszcuk et al., 2013; Getz et al., 2018; Flesch et al., 2019; Wang et al., 2017) .

Effects of biochar on physical and chemical properties of soil and bioretention media

In this section we provide information on effects of biochar on pollutant attenuation and the physical properties of soil and bioretention media.

Effect of biochar on retention and fate of phosphorus

Biochar is not likely to provide significant phosphorus retention in bioretention practices unless impregnated with cations (e.g. magnesium) during production at relatively low temperatures (e.g. less than 600oC.)

Biochar may have several properties for managing stormwater, such as increased water and pollutant retention, improving soil physical properties, and attenuating bacteria and pathogens. Biochar has been examined as a potential amendment to engineered media in bioretention or other stormwater control practices. With respect to phosphorus, information from the literature is mixed. Below are summaries from several studies.

  • Mohanty et al. (2018) observed that biochar does not absorb phosphate efficiently. Phosphorus retention can be enhanced by impregnating biochar with cations such as magnesium and zinc.
  • Reddy et al. (2014) found that biochar reduced influent phosphate concentrations by 47% in column experiments. Influent concentrations were 0.57 and 0.82 mg/L for unwashed and washed biochar, respectively. These concentrations are on the high end of concentrations found in urban stormwater.
  • Yaoa et al. (2011) observed retention in biochar-(sugar beet source)amended soils that were fertilized. Adsorption was dominated by magnesium oxides and maximum adsorption occurred at pH values less than 4.
  • Zhaoa et al. (2013) studied different feedstocks and observed high phosphorus concentrations in animal-based feedstocks and wastewater sludge (0.065 - 0.44%) compared to other feedstocks (0.007 - 0.07%)
  • Iqbal et al. (2015) examined leaching of phosphorus from compost (80% yard and 20% food waste) and co-composted biochar (100% fir-forest slash). They found biochar amendments did not significantly reduce the leaching of phosphorus compared to the compost only treatment. Phosphorus leached from biochar, but because phosphorus concentrations in biochar are low, this leaching contributed little total phosphorus. Leached phosphorus was primarily in the form of orthphosphate.
  • Han et al. (2018) found that addition of biochar to soil led to increased desorption of phosphorus during winter freeze-thaw cycles.
  • Soinne et al. (2014) observed no effect of biochar on phosphorus retention in a sandy and two clay soils.

Effect of biochar on retention and fate of other pollutants

Effect of biochar on soil physical and hydraulic properties

Because of a large surface area and internal porosity, biochar can affect soil physical properties (Mohanty et al., 2018; Herrera Environmental Consultants, 2015; Iqbal et al., 2015; Imhoff, 2019; Jien and Wang, 2013). These effects are most pronounced in soils with low organic matter concentration.

  • Porosity and surface area. Biochar significantly increases the porosity of most soils.
  • Water holding capcity. Biochar significantly increases the water holding capacity of soil.
  • Hydraulic conductivity. Biochar increases the hydraulic conductivity of fine- and medium-grained soils and may decrease the hydraulic conductivity of coarse-grained soils.
  • Structure. Biochar enhances aggregation in soils, thus enhancing soil structure and potentially increasing soil macroporosity.

Effects of biochar on soil fertility, plant growth, and microbial function

Effects of biochar on soil fertility, plant growth, and microbial function are affected by several factors, including feedstock, production method, soil, application rate, and biochar age. Biochar has few negative effects on fertility, plant growth and microbial function and in many cases has the potential to greatly improve soil physical, chemical and biological conditions.

DeLuca et al. (2015) provide an extensive discussion of biochar effects on nutrient cycling, fertility, and microbial function in soil. Their paper is based on an extensive review of the literature at the time of their publication. The following discussion is primarily based on information contained in this document. A list of suggested articles is provided at the end of this section.

Biochars derived from nutrient rich sources such as manure and sludge may directly provide nutrients. Most biochars, however, have limited direct contribution to the nutrient pool with the exception of potassium and ammonium. Biochar may accelerate nutrient cycling over long time scales by serving as a short-term source of highly available nutrients, which become incorporated into living biomass and labile soil organic pools. Thus biochar, while typically providing modest inputs of nutrients, enhances the bioavailability of nutrients in soil.

Because biochar typically enhances soil physical properties, including increasing water holding capacity, improving gas exchange, increasing surface area and availability of microsites for microbes, and in some cases increasing cation exchange capacity, biochar enhances microbial activity in soil. In addition, carbon in biochar provides a sorptive surface that can retain nutrients and thus minimize leaching and volatilization of nutrients.

Several studies suggest biochar amendments in soil result in increased microbial biomass, while other studies show no effect. Mixed results have also been observed for the effects of biochar on microbial community composition.

Specific conclusions from the DeLuca et al. (2015) paper include the following.

  • Biochar increases nitrogen mineralization is soils with low mineralization potential (e.g. forest soils). Wood-based biochars appear to have the greatest effect on mineralization.
  • Aged biochar shows greater accumulation of inorganic nitrogen, suggesting reduced nitrogen availability and cycling over time. Additions of fresh biochar are recommended if continued enhanced nutrient cycling is desired.
  • Low-temperature biochars have greater nitrogen immobilization due to more bioavailable carbon, but immobilization to these biochars is likely to be short-term.
  • Biochar effects on nitrogen fixation are mixed, but studies of compost-biochar mixes show a decrease in nitrogen fixation while wood-based biochars show increased fixation.
  • Phosphorus in wood-based biochars is largely immediately soluble and readily released to soil, where it becomes available to plants. However, the overall phosphorus concentration in wood-based biochars is much lower than in manure- or sludge-based biochars.
  • Application of biochar at varying rates result in an increase in available soil phosphorus, but there is little evidence this translates into increased plant uptake. This may be due to presence of abundant sites for adsorption in fresh biochars. Phosphorus decreases over time as biochar ages.
  • Laboratory studies have shown that biochar addition induces an increase in phosphatase activity which would increase the release of P from soil organic matter and organic residues.
  • Biochar effects on phosphorus are likely to be greatest in acidic soils, where addition of biochar raises pH and increases the potential adsorption to alkaline metals (calcium, potassium, magnesium).
  • Biochar effects on sulfur are uncertain, but are likely to be similar to those for phosphorus. Any enhanced adsorption or mobilization, particularly in aged biochar, will most likely be attributable to enhanced water holding capacity and surface area.

Recommended reading

  • Anderson, C. R., Condron, L. M., Clough, T. J., Fiers, M., Stewart, A., Hill, R. A. and Sherlock, R. R. (2011) ‘Biochar induced soil microbial community change: Implications for biogeochemical cycling of carbon, nitrogen and phosphorus’, Pedobiologia, vol 54, pp309–320.
  • Borchard, N., Wolf, A., Laabs, V., Aeckersberg, R., Scherer, H. W., Moeller, A. and Amelung, W. (2012a) ‘Physical activation of biochar and its meaning for soil fertility and nutrient leaching – a greenhouse experiment’, Soil Use and Management, vol 28, pp177–184
  • Chan, K. Y. and Xu, Z. (2009) ‘Biochar: nutrient properties and their enhancement’, in J. Lehmann and S. Joseph (eds) Biochar for Environmental Management, Earthscan, London, pp 67–84
  • Clough, T. J. and Condron, L. M. (2010) ‘Biochar and the nitrogen cycle: introduction’, Journal of Environmental Quality, vol 39, pp1218–1223
  • Crutchfield, E. F., Merhaut, D. J., Mcgiffen, M. E. and Allen, E. B. (2010) ‘Effects of biochar on nutrient leaching and plant growth’, Hortscience, vol 45, S163–S163.
  • Jeffery, S., Verheijen, F. G. A., Van Der Velde, M. and Bastos, A. C. (2011) ‘A quantitative review of the effects of biochar application to soils on crop productivity using meta-analysis’, Agriculture Ecosystems and Environment, vol 144, pp175–187
  • Jones, D. L., Rousk, J., Edwards-Jones, G., DeLuca, T. H. and Murphy, D. V. (2012) ‘Biochar-mediated changes in soil quality and plant growth in a three year field trial’, Soil Biology and Biochemistry, vol 45, pp113–124
  • Joseph, S. D., Downie, A., Munroe, P., Crosky, A. and Lehmann, J. (2007) ‘Biochar for carbon sequesteration, reduction of greenhouse gas emissions and enhancement of soil fertility; a review of the materials science’ Proceedings from Australian Combustion Symposium, University of Sydney, Australia, pp1–4
  • Laird, D., Fleming, P., Wang, B., Horton, R. and Karlen, D. (2010) ‘Biochar impact on nutrient leaching from a Midwestern agricultural soil’, Geoderma, vol 158, pp436–442
  • Lehmann, J., Rillig, M. C., Thies, J., Masiello, C. A., Hockaday, W. C. and Crowley, D. (2011) ‘Biochar effects of soil biota – A review’, Soil Biology and Biochemistry, vol 43, pp1812–1836
  • Nelson, N. O., Agudelo, S. C., Yuan, W. and Gan, J. (2011) ‘Nitrogen and phosphorus availability in biochar-amended soils’, Soil Science, vol 176, pp218–226
  • Pietikäinen, J., Kiikkila, O. and Fritze, H. (2000) ‘Charcoal as a habitat for microbes and its effect on the microbial community of the underlying humus’, Oikos, vol 89, pp231–242
  • Quilliam, R. S., Marsden, K. A., Gertler, C., Rousk, J., DeLuca, T. H. and Jones, D. L. (2012) ‘Nutrient dynamics, microbial growth and weed emergence in biochar amended soil are influenced by time since application and reapplication rate’, Agriculture, Ecosystems, and Environment, vol 158, pp192–199
  • Schultz, H. and Glaser, B. (2012) ‘Effects of biochar compared to organic and inorganic fertilizers on soil quality and plant growth in a greenhouse experiment’, Journal of Soil Science and Plant Nutrition, vol 175, pp410–422
  • Yoo, G. and Kang, H. (2010) ‘Effects of biochar addition on greenhouse gas emissions and microbial responses in a short-term laboratory experiment’, Journal of Environmental Quality, vol 41, pp1193–1202

Standards, classification, testing, and distributors

Because of the large number of potential feedstocks, production conditions (primarily temperature), and applications for biochar, biochar classification is an active area of research. The information in this section largely comes from the International Biochar Initiative, but some additional references include the following.

  • Arbestain et al. (2015): A biochar classification system and associated test methods
  • Klassen (2017): Biochar characterization and a method for estimating biochar quality from proximate analysis results
  • Leng et al. (2019): Biochar stability assessment methods: A review
  • United States Biochar Initiative
  • Budai et al. (2013): Biochar Carbon Stability Test Method: An Assessment of methods to determine biochar carbon stability

Biochar standards

The Internation Biochar Initiative (IBI) developed Standardized Product Definition and Product Testing Guidelines for Biochar That Is Used in Soil, also referred to The Biochar Standards. These standards provide guidelines and is not a formal set of industry specifications. The goal of The Biochar Standards is to "universally and consistently define what biochar is, and to confirm that a product intended for sale or use as biochar possesses the necessary characteristics for safe use. The IBI Biochar Standards also provide common reporting requirements for biochar that will aid researchers in their ongoing efforts to link specific functions of biochar to its beneficial soil and crop impacts." The IBI also provides a certification program. Information on the standards and certification are found on International Biochar Institute's website or at the IBI's Standardized Product Definition and Product Testing Guidelines for Biochar That Is Used in Soil.

The IBI also provides a biochar classification tool. Currently, four biochar properties are classified:

  • Carbon storage value
  • Fertilizer value (P, K, S, and Mg only)
  • Liming value
  • Particle size distribution


Caution: The Minnesota Pollution Control Agency does not endorse specific distributors of biochar or biochar products

A list of biochar distributors is provided on the United States Biochar Initiative website (USBI). Note the USBI neither provides endorsements nor accepts liability for any particular product or technology listed.

Test methods

There is no universally accepted standard for biochar testing. The International Biochar Initiative (IBI) developed Standardized Product Definition and Product Testing Guidelines for Biochar That Is Used in Soil. The goals of this document are to provide "stakeholders and 5 commercial entities with standards to identify certain qualities and characteristics of biochar materials according to relevant, reliable, and measurable characteristics." The document provides information and test parameters and test nethods for three categories.

  • Test Category A – Basic Utility Properties (required)
  • Test Category B – Toxicant Assessment (required)
  • Test Category C – Advanced Analysis and Soil Enhancement Properties

The IBI document also provides information on sampling procedures, laboratory standards, timing and frequency of testing, feedstcok and production parameters, frequency of testing, reporting, and additional information for specific types of biochar. The document also provides a discussion of H:C ratios, which are used to indicate the stability of a particular biochar.

Effects of aging

Biochar undergoes transformations in soil after application, primarily through oxidation processes, typically mediated by microbes. Several researchers have studied effects of aging on biochar properties. Although researchers observe similar changes in the chemical and physical structure of biochar with aging, observed effects vary. It is therefore difficult to draw general conclusions about likely changes in the effects of biochar aging on fate of pollutants and soil hydraulic properties.

Below is a summary of some research findings.

  • Mia et al. (2019) observed an increase in carboxylic and phenolic groups, a reduction of oxonium groups and the transformation of pyridine to pyridone with oxidation. This led to increased adsorption of ammonium and reduced adsorption of phosphate. Addition of biochar derived organic matter improved phosphate retention.
  • Paetsch et al. (2018) studied effects of fresh and aged biochar on water availability and microbial parameters of a grassland soil. They observed improved water retention and microbial function with aged biochar. This was attributed to increased soil mineralization in soils with aged biochar.
  • Paetsch et al. (2018) observed increased C:N ratios as biochar aged.
  • Dong et al. (2017) observed increased specific surface area, increased carbon content, smaller average pore size, but no change in chemical structure of aged biochar versus fresh biochar.
  • Quan et al. (2020) and Spokas (2013) observed biologically-mediated changes in aged biochar. Mineralization resulted in decreased carbon content in aged biochar.
  • Hale et al. (2012) determined that aged biochar retained its ability to adsorb PAHs.
  • Cao et al. found that aged biochar had decreased carbon and nitrogen contents; reduced pH values, reduced porosity and specific surface area, and increased oxygen-containing functional groups on the surface. In general, the surface characteristics of the aged biochar varied with soil type.

Storage, handling, and field application

The following guidelines for field application of biochar are presented by Major (2010).

  • Biochar dust particles can form explosive mixtures with air in confined spaces, and there is a danger of spontaneous heating and ignition when biochar is tightly packed. This occurs because fresh biochar quickly sorbs oxygen and moisture, and these sorption processes are exothermic, thus potentially leading to high temperature and ignition of the material.
  • Volatile compounds present in certain biochar materials may also represent a fire hazard, but the amount of such compounds found in biochar can be managed by managing the pyrolysis temperature and heating rate. Certain chemicals can be added to biochar to decrease its flammability (e.g. boric acid, ferrous sulfate). The best way to prevent fire is to store and transport biochar in an atmosphere which excludes oxygen. Formulated biochar products such as mixtures with composts, manures, or the production of biochar-mineral complexes will potentially yield products which are much less flammable.
  • For fine-grained biochars, wind losses can be significant (up to 30% loss has been reported). Biochar can be moistened, although this will add to the weight of the material and increase transportation costs. If wind loss is a concern, apply biochar when winds are mild and/or during a light rain. Pelleted biochars or mixing with other materials may reduce wind loss.
  • To avoid water erosion, incorporate biochar into the soil.
  • Application rates vary depending on the biochar and the intended use of the biochar.
  • Biochar is relatively stable and recalcitrant. In some cases, biochar may improve soil conditions with time. Consequently, biochar application frequency is likely to be on the order of years.
  • Biochar can be readily mixed with other materials, such as compost.
  • The depth of biochar application varies with the intended purpose.
    • For fertility applications, locate biochar near the soil surface in the active rooting zone.
    • For moisture management, locate biochar throughout the root zone.
    • For carbon sequestration, locate biochar deeper in the soil profile to reduce the likelihood of microbial mineralization.
  • For stormwater applications, biochar can be broadcast and then incorporated into the soil. If fertility is the primary objective, banding may be utilized.
  • For turf applications, biochar can be mixed with soil (sand and topsoil) and other amendments such as compost.
  • Application rates depend on the intended use of a biochar. Field testing is recommended prior to application. Typical rates reported in the literature are 5-50 tonnes of biochar per hectare.


Because biochar is produced from biomass, including wastes, it is sustainable from an availability or supply standpoint. Sustainable biochar production, however, is less certain based on current economic constraints. Biochar has several potential markets and exploiting these markets is necessary for biochar production to be sustainable. Examples of specific markets include stormwater media, soil health and fertility, and carbon sequestration [Biogreen] (accessed December 10, 2019). Sustainable biochar production must also meet certain environmental and economic criteria, includign the following.

  • Biochar systems should be, at a minimum, carbon and energy neutral.
  • Biochar systems should prioritize the use of biomass residuals for biochar production.
  • Biochar systems should be safe, clean, economical, efficient, and meet or exceed environmental standards and regulatory requirements of the regions where they are deployed.
  • Biochar systems should promote or enhance ecological conditions for biodiversity at the local and landscape level.
  • Biochar systems should not pollute or degrade water resources.
  • Biochar systems should not jeopardize food security by displacing or degrading land grown for food; and should seek to complement existing local agro-ecological practices.

For more information, see the International Biochar Initiative discussion on sustainable biochar production. For a discussion of biochar sustainability, see sustainability and Certification (Vereijen et al., 2015).