Category:Level 3 - Best management practices/Structural practices/Permeable pavement
Main page for permeable pavement
Permeable pavements allow stormwater runoff to filter through surface voids into an underlying stone reservoir for temporary storage and/or infiltration. The most commonly used permeable pavement surfaces are pervious concrete, porous asphalt, and permeable interlocking concrete pavers (PICP). Permeable pavements have been used for areas with light traffic at commercial and residential sites to replace traditional impervious surfaces in low-speed roads, alleys, parking lots, driveways, sidewalks, plazas, and patios. While permeable pavements can withstand truck loads, permeable pavement has not been proven in areas exposed to high repetitions of trucks or in high speed areas because its’ structural performance and surface stability have not yet been consistently demonstrated in such applications.
This page (category) provides links to pages that provide information on permeable pavement.
Subcategories
This category has only the following subcategory.
Pages in category "Level 3 - Best management practices/Structural practices/Permeable pavement"
The following 18 pages are in this category, out of 18 total.
C
R
Media in category "Level 3 - Best management practices/Structural practices/Permeable pavement"
The following 10 files are in this category, out of 10 total.
Permeable interlocking concrete pavement cross section.jpg 500 × 281; 28 KB
Pervious asphalt cross section.jpg 800 × 494; 66 KB
Pervious concrete cross section.jpg 1,080 × 610; 45 KB
This page was last edited on 12 February 2023, at 14:07.