This site is currently undergoing revision. For more information, open this link.
This page will be populated with information from a fact sheet. The link to that fact sheet is below.

Link to fact sheet on managing street sweepings - [1]

Street sweepings are materials such as sand, salt, leaves and debris removed from city streets, parking lots and sidewalks to prevent these materials from being washed into storm sewers and surface waters, and to improve the appearance of public roadways. For a discussion of potential benefits associated with street sweeping, see Overview, water quality benefits, and other co-benefits of street sweeping.

Sources of materials in street sweepings

The primary sources of materials in street sweepings include the following.

  • Automobiles and other vehicles. These are important sources of hydrocarbons associated with fluids (e.g. oil, gasoline, antifreeze) and metals associated with vehicle parts (e.g. brake linings, tire wear). These materials, particularly metals, are typically released at higher rates as vehicle speed increases and as the extent of stopping increases.
  • Vegetation. Trees and grass adjacent to impermeable surfaces are important sources of organic materials to impervious surfaces that are swept. These organic materials are important sources of phosphorus and nitrogen, may contribute to oxygen demand, and may act as source areas for bacteria.
  • Atmospheric deposition. Deposition is an important source of inorganic solids. This includes deposition from near-source and distant-source areas. These solids may be important sources of pollutants attached to the solids, including metals, PAHs, and a range of emerging chemicals (e.g. pesticides, microplastics).
  • Local sources. This includes a wide range of sources that may have significant impacts locally. Examples include active construction sites (sources of sediment), industry (sources of organics), and contaminated sites (e.g. salvage yards, vehicle operations facilities, waste management facilities).
  • Trash and debris. With streets that are frequently swept, trash is typically not an important source of pollutants. However, in some areas where inputs of these are high, or where sweeping is infrequent, thus allowing the materials to break down, trash and debris can be important contributors of certain pollutants, such as microplastics.

Composition and characteristics of street sweeping materials

The composition and characteristics of street sweepings depends on multiple factors, including but not limited to the following.

  • Source area (land use). Concentrations of metals, PAHs, and other organics, including many emerging chemicals,
  • Type of sweeper.
  • Time of year.
  • Buildup period/interval.

Concentrations of potential pollutants in sweeping material

Testing street sweepings

Managing and disposal of sweeping material