Difference between revisions of "File:Picture 020.JPG"
Special:Contributions/Jstock > Special:Contributions/Rolmanson > Recommendations and guidance for utilizing monitoring to meet TMDL permit requirements > Test page 6 > File:Picture 020.JPG

Latest revision as of 16:38, 19 December 2022

Failure to install redundant perimeter control due to encroachment into buffer zone. Only 1 perimeter control BMP is present. Correct by installing an additional perimeter control BMP (silt fence, mulch berm, bioroll, etc.).

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	18:35, 5 May 2016		1,200 × 900 (925 KB)	PLeegar (talk \| contribs)

You cannot overwrite this file.

File usage

The following page uses this file:

Construction stormwater photo gallery - Perimeter control

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	EASTMAN KODAK COMPANY
Camera model	KODAK DX6340 ZOOM DIGITAL CAMERA
Exposure time	1/350 sec (0.0028571428571429)
F Number	f/5.6
Date and time of data generation	15:08, 5 October 2004
Lens focal length	12.8 mm
Orientation	Normal
Horizontal resolution	230 dpi
Vertical resolution	230 dpi
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.2
Date and time of digitizing	15:08, 5 October 2004
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	8.5
APEX aperture	5
APEX exposure bias	0
Maximum land aperture	3.2 APEX (f/3.03)
Metering mode	Pattern
Light source	Unknown
Flash	Flash did not fire, auto mode
Supported Flashpix version	0,100
Color space	sRGB
Exposure index	100
Sensing method	One-chip color area sensor
File source	Digital still camera
Scene type	A directly photographed image

Revision as of 18:35, 5 May 2016 (view source) PLeegar (talk \| contribs)	Latest revision as of 16:38, 19 December 2022 (view source) Mtrojan (talk \| contribs) m
(One intermediate revision by the same user not shown)
Line 1:	Line 1:
	+	Failure to install redundant perimeter control due to encroachment into buffer zone. Only 1 perimeter control BMP is present. Correct by installing an additional perimeter control BMP (silt fence, mulch berm, bioroll, etc.).

	+	[[Category:Level 3 - General information, reference, tables, images, and archives/Images/Sediment control photos]]

Difference between revisions of "File:Picture 020.JPG" Special:Contributions/Jstock > Special:Contributions/Rolmanson > Recommendations and guidance for utilizing monitoring to meet TMDL permit requirements > Test page 6 > File:Picture 020.JPG

Latest revision as of 16:38, 19 December 2022

File history

File usage

Metadata

Difference between revisions of "File:Picture 020.JPG"
Special:Contributions/Jstock > Special:Contributions/Rolmanson > Recommendations and guidance for utilizing monitoring to meet TMDL permit requirements > Test page 6 > File:Picture 020.JPG