File:Trench and berm perimeter control.jpg
Revision as of 17:53, 18 April 2019 by ZKolsum (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

File:Trench and berm perimeter control.jpg

Original file ‎(3,996 × 2,528 pixels, file size: 2.95 MB, MIME type: image/jpeg)

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	17:53, 18 April 2019		3,996 × 2,528 (2.95 MB)	ZKolsum (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Canon
Camera model	Canon PowerShot D30
Exposure time	1/60 sec (0.016666666666667)
F Number	f/3.9
ISO speed rating	250
Date and time of data generation	13:13, 3 June 2016
Lens focal length	5 mm
Orientation	Normal
Horizontal resolution	180 dpi
Vertical resolution	180 dpi
File change date and time	13:13, 3 June 2016
Y and C positioning	Co-sited
Exif version	2.3
Date and time of digitizing	13:13, 3 June 2016
Meaning of each component	Y Cb Cr does not exist
Image compression mode	3
APEX shutter speed	5.90625
APEX aperture	3.9375
APEX exposure bias	0
Maximum land aperture	3.9375 APEX (f/3.91)
Metering mode	Pattern
Flash	Flash did not fire, auto mode
Rating (out of 5)	0