Difference between revisions of "General MPCA Simple Estimator result QAQC list"
(Created page with "<font size=3>'''General MPCA Simple Estimator result QAQC list'''</font size><br> Link to this table <table class="sortable...") |
m |
||
| Line 25: | Line 25: | ||
<tr> | <tr> | ||
<td>Confirm only the directly-contributing watershed area is applied for each BMP</td> | <td>Confirm only the directly-contributing watershed area is applied for each BMP</td> | ||
| − | <td> | + | <td>The area assigned to a given BMP should be only the directly-contributing watershed area and should NOT include area tributary to other BMPs upstream</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Review TSS/TP removal rates</td> | <td>Review TSS/TP removal rates</td> | ||
| − | <td>Compare pollutant removal values to literature values | + | <td>Compare pollutant removal values to literature values. Note: percent load reduction shown for each BMP type is calculated based on the total watershed loading</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Review BMP sizing recommendations and review contributing watershed area</td> | <td>Review BMP sizing recommendations and review contributing watershed area</td> | ||
| − | <td> | + | <td>Bypass from undersized BMPs is not calculated. For this reason, only the area for which the BMP is correctly-sized should be modeled to the BMP (the remainder should be modeled as untreated).</td> |
</tr> | </tr> | ||
</table> | </table> | ||
Revision as of 01:26, 16 September 2019
General MPCA Simple Estimator result QAQC list
Link to this table
| QAQC / Review item | Related MIDS Calculator Output |
|---|---|
| Confirm total watershed area is correct | Review land use-based area assigned in the "total load" table |
| Confirm annual precipitation totals are correct | Review annual rainfall values in column G and confirm all are the same value |
| Review watershed pollutant concentrations | Compare watershed areal loading values in the "total load" table to literature values in Table 9 |
| Review watershed routing to BMPs | Review land use-based area assigned to each BMP type |
| Confirm only the directly-contributing watershed area is applied for each BMP | The area assigned to a given BMP should be only the directly-contributing watershed area and should NOT include area tributary to other BMPs upstream |
| Review TSS/TP removal rates | Compare pollutant removal values to literature values. Note: percent load reduction shown for each BMP type is calculated based on the total watershed loading |
| Review BMP sizing recommendations and review contributing watershed area | Bypass from undersized BMPs is not calculated. For this reason, only the area for which the BMP is correctly-sized should be modeled to the BMP (the remainder should be modeled as untreated). |