Line 40: | Line 40: | ||
**Harvest and reuse systems provide a safeguard against drought conditions through stored water that can be used to keep landscaping alive and well over several days or weeks if necessary | **Harvest and reuse systems provide a safeguard against drought conditions through stored water that can be used to keep landscaping alive and well over several days or weeks if necessary | ||
**Potential for more affordable housing conditions when implemented as part of a renting strategy (Report Finds Onsite Water Reuse Can Boost Affordable Housing, Spread Climate Resilience – Texas Living Waters Project) | **Potential for more affordable housing conditions when implemented as part of a renting strategy (Report Finds Onsite Water Reuse Can Boost Affordable Housing, Spread Climate Resilience – Texas Living Waters Project) | ||
+ | |||
+ | ==Design considerations== | ||
+ | Maximizing specific green infrastructure (GI) benefits of constructed areas requires design considerations prior to installation. While site limitations cannot always be overcome, the following recommendations are given to maximize the GI benefit of water harvesting and reuse. | ||
+ | |||
+ | Note: Harvest and reuse systems are a good stormwater treatment practice when used in a treatment train. Under the Minnesota Construction Stormwater Permit GI, if Class D soils are present on the site infiltration practices cannot be used. Class A soils are the most desirable for infiltration but infiltration can also be successful with B or C soils. | ||
+ | These notes are not mandates nor are they a complete list of what is the best practice for each site, site consideration needs will be addressed by the building design team. | ||
+ | |||
+ | --- Maybe add a chart indicating soil penetrability of different HSG groups — | ||
+ | |||
+ | *Water quality | ||
+ | **The designer should consider the project site pollutant sources during design and determine if there is affordable harvest and reuse techniques available or if additional stormwater treatment measures are required for use | ||
+ | **Designer should place the appropriate settlement and solid removal procedures in the treatment train to prevent their entry into the reuse containment system | ||
+ | **Place the site harvest and reuse system in a location where the majority of water will flow through the treatment system | ||
+ | **Design the site container to maximize storage capacities and prevent short-circuiting during rainfall events | ||
+ | **The designer should build in first flush diverters in the collection system design to bypass high pollution loads during snowmelt or pollutant laden events when necessary to meet the requirements of the water use | ||
+ | *Water quantity and hydrology: | ||
+ | **The incorporation of a harvest reuse system will provide consistent water availability to the site | ||
+ | **Construct the distribution system to reach all areas of the site that require water when economically feasible | ||
+ | **Determine the sites’ water needs for vegetation and plant systems over a given time period and design the water storage container to meet these needs | ||
+ | *Climate resiliency: | ||
+ | **Incorporate vegetation into the water reuse system to help remove pollutants and reduce the sites’ carbon footprint | ||
+ | **Establish water reuse systems that will meet the vegetation needs for the site and provide adequate water for growth and maintenance | ||
+ | **Construct the water reuse system in the area best for interception of pollutants | ||
+ | *Habitat improvement: | ||
+ | **When using water reuse systems that will have direct interactions with people, ensure the appropriate treatment techniques are used to meet the necessary water standards | ||
+ | **Designer should be aware of the wildlife of the area and ensure any treatment measures, especially ones that use chemicals, do not pose a threat to the wildlife and their ecosystem | ||
+ | **Water reuse systems can establish vegetation that can attract pollinators and promote plant propagation — link to pollinator page | ||
+ | **Develop conveyance systems in such a way to minimize changes in temperature that can be detrimental to cold water fish habitats | ||
+ | *Community livability: | ||
+ | **Include recreational infrastructure and interpretative signs | ||
+ | **Ensure safety of water harvest and reuse systems and adjacent areas by making the storage container inaccessible to unauthorized individuals | ||
+ | **Conduct surveys prior to and after development to identify features that enhance education, recreation, and other benefits of water reuse systems that are desirable to the served customer/community/stakeholder | ||
+ | **Design grown vegetation and plantings with easy access (e.g. locate close to road, create public access) | ||
+ | **Create attractive slopes using vegetation and proper erosion protection | ||
+ | *Health benefits: | ||
+ | **Design storage containment systems for safety. Minimize the depth needed for pooled water if the containing area is exposed. Minimize access to infiltration or other treatment train areas by planting shrubs, fencing, or other area denial systems. Additionally, properly mark the area with signs. Minimizing depth of infiltration systems reduces hazards for children. | ||
+ | **Infiltration systems naturally control mosquito habitats by going dray within a few days compared to typical stormwater ponds | ||
+ | *Economic benefits and savings: | ||
+ | **Maximize sight-lines to the vegetation that the water reuse system services | ||
+ | **Integrating water reuse into landscape design, including creating habitat, pathways, picnic areas, etc can increase property value | ||
+ | |||
+ | The Pollution Control Agency allows for infiltration to be used as a credit source when meeting pollutant budgets for Total Suspended Solids (TSS) and Total Phosphorus (TP). The methodology for counting credits can be found here. | ||
+ | |||
+ | Additional Information: | ||
+ | Water harvest and reuse systems are effective for use in class C and D soils | ||
+ | Harvest and reuse systems can be incorporated in a useful and beneficial manner to site owners. An example of a well designed harvest and reuse system that serves multiple purposes can be found in Thailand at the Chulalongkorn University | ||
+ | |||
+ | ==Recommended reading== | ||
+ | *[https://www.epa.gov/waterreuse Water Reuse and Recycling] - US EPA | ||
+ | *[https://www.epa.gov/waterreuse/basic-information-about-water-reuse Basic Information about Water Reuse] - US EPA | ||
+ | *[https://www.minnehahacreek.org/project/stormwater-harvesting-and-reuse-study Stormwater Harvesting and Reuse Study] - Minnehaha Creek Watershed District | ||
+ | *[https://www.epa.gov/recycle/reducing-and-reusing-basics Reducing and Reusing Basics] - US EPA |
Green infrastructure (GI) encompasses a wide array of practices, including stormwater management. Green stormwater infrastructure (GSI) encompasses a variety of practices primarily designed for managing stormwater runoff but that provide additional benefits such as habitat or aesthetic value.
There is no universal definition of GI or GSI (link here for more information). Consequently, the terms are often interchanged, leading to confusion and misinterpretation. GSI practices are designed to function as stormwater practices first (e.g. flood control, treatment of runoff, volume control), but they can provide additional benefits. Though designed for stormwater function, GSI practices, where appropriate, should be designed to deliver multiple benefits (often termed "multiple stacked benefits". For more information on green infrastructure, ecosystem services, and sustainability, link to Multiple benefits of green infrastructure and role of green infrastructure in sustainability and ecosystem services.
Maximizing specific green infrastructure (GI) benefits of constructed areas requires design considerations prior to installation. While site limitations cannot always be overcome, the following recommendations are given to maximize the GI benefit of water harvesting and reuse.
Note: Harvest and reuse systems are a good stormwater treatment practice when used in a treatment train. Under the Minnesota Construction Stormwater Permit GI, if Class D soils are present on the site infiltration practices cannot be used. Class A soils are the most desirable for infiltration but infiltration can also be successful with B or C soils. These notes are not mandates nor are they a complete list of what is the best practice for each site, site consideration needs will be addressed by the building design team.
--- Maybe add a chart indicating soil penetrability of different HSG groups —
The Pollution Control Agency allows for infiltration to be used as a credit source when meeting pollutant budgets for Total Suspended Solids (TSS) and Total Phosphorus (TP). The methodology for counting credits can be found here.
Additional Information: Water harvest and reuse systems are effective for use in class C and D soils Harvest and reuse systems can be incorporated in a useful and beneficial manner to site owners. An example of a well designed harvest and reuse system that serves multiple purposes can be found in Thailand at the Chulalongkorn University