Navigation
Main page
Table of contents
Index (Categories)
What's new
Response to comments
Future updates
Events
In the News
Funding
Recent changes
Help
Export to pdf
Tools
What links here
Related changes
Special pages
Printable version
Permanent link
Page information
MPCA Links
MPCA Homepage
Stormwater
Policies / Disclaimers
Minnesota Stormwater Manual
Search Help
Log in
Search:
Search
Industrial Stormwater 2015 – 2020 Permit effluent monitoring requirements
Industrial Stormwater 2015 – 2020 Permit effluent monitoring requirements
Contents
1
Sector A - Timber Products
1.1
Subsector A4 - Discharges From Wet Decking Storage Areas
2
Sector C - Chemical and Allied Products Mfg
2.1
Subsector C1 - Phosphate Subcategory of Agricultural Chemicals
3
Sector D - Asphalt Paving and Roofing Materials and Lubricant Mfg
3.1
Subsector D2 - Discharges from Production of Asphalt Emulsions Areas
4
Sector E - Glass, Clay, Cement, Concrete, and Gypsum Products
4.1
Subsector E3 - Cement Manufacturing Facility, Material Storage Runoff
5
Sector K - Hazardous Waste Treatment, Storage, or Disposal Facilities
5.1
Subsector K2 - Discharges From Hazardous Waste Landfills Subject To Effluent Limitations In 40 CFR Part 445 Subpart A
6
Sector L - Landfills and Land Application Sites
6.1
Subsector L3 - Any Landfill That Discharges To Surface Water(s), Stormwater That Has Directly Contacted Solid Waste (pursuant to 40 CFR pt. 445, subp. B.)
7
Sector O - Steam Electric Generating Facilities
7.1
Subsector O3 - Runoff From Coal Storage Piles At Steam Electric Generating Facilities
Sector A - Timber Products
Subsector A4 - Discharges From Wet Decking Storage Areas
Debris - No discharge of debris that will not pass through a 2.54cm (1 inch) round opening, instantaneous maximum (visual assessment)
pH - 6.0-9.0
Sector C - Chemical and Allied Products Mfg
Subsector C1 - Phosphate Subcategory of Agricultural Chemicals
Fluoride, Total (as F) - 75 mg/L
Phosphorus, Total (as P) - 105 mg/L
Sector D - Asphalt Paving and Roofing Materials and Lubricant Mfg
Subsector D2 - Discharges from Production of Asphalt Emulsions Areas
Oil & Grease, Total - 15 mg/L
Solids, Total Suspended (TSS) - 23 mg/L
pH - 6.0-9.0
Sector E - Glass, Clay, Cement, Concrete, and Gypsum Products
Subsector E3 - Cement Manufacturing Facility, Material Storage Runoff
Solids, Total Suspended (TSS) - 50 mg/L
pH - 6.0-9.0
Sector K - Hazardous Waste Treatment, Storage, or Disposal Facilities
Subsector K2 - Discharges From Hazardous Waste Landfills Subject To Effluent Limitations In 40 CFR Part 445 Subpart A
alpha-Terpineol - 0.042 mg/L
Aniline - 0.024 mg/L
Arsenic, Total (as As) - 1.1 mg/L
Benzoic Acid - 0.119 mg/L
BOD, Carbonaceous 05 Day (20 Deg C) - 220 mg/L
Chromium, Total (as Cr) - 1.1 mg/L
Naphthalene - 0.059 mg/L
Nitrogen, Ammonia, Total (as N) - 10 mg/L
p-Cresol - 0.024 mg/L
pH - 6.0-9.0 SU
Phenol - 0.048 mg/L
Pyridine - 0.072 mg/L
Solids, Total Suspended (TSS) - 88 mg/L
Zinc, Total (as Zn) - 0.535 mg/L
Sector L - Landfills and Land Application Sites
Subsector L3 - Any Landfill That Discharges To Surface Water(s), Stormwater That Has Directly Contacted Solid Waste (pursuant to 40 CFR pt. 445, subp. B.)
BOD, Carbonaceous 05 Day (20 Deg C) - 140
Benzoic Acid - 0.12
Nitrogen, Ammonia, Total (as N) - 10
Phenol - 0.026
Solids, Total Suspended (TSS) - 88
Zinc, Total (as Zn) - 0.20
alpha-Terpineol - 0.033
p-Cresol - 0.025
pH - 0-9.0
Sector O - Steam Electric Generating Facilities
Subsector O3 - Runoff From Coal Storage Piles At Steam Electric Generating Facilities
Solids, Total Suspended (TSS) - 50 mg/L
pH - 6.0-9.0
Search:
Search
This page was last edited on 30 April 2015, at 20:14.
Template:Footer