Line 4: Line 4:
  
 
===7.1===
 
===7.1===
<big>BMP Selection and Installation. [Minn. R. 7090]</big>
+
<big>[https://stormwater.pca.state.mn.us/index.php?title=MN_CSW_Permit_Section_25_Definitions#25.4 BMP] Selection and Installation.</big>
  
 
===7.2===
 
===7.2===
<big>Permittees must select, install, and maintain the BMPs identified in the SWPPP and in this permit in an appropriate and functional manner and in accordance with relevant manufacturer specifications and accepted engineering practices. [Minn. R. 7090]</big>
+
<big>[https://stormwater.pca.state.mn.us/index.php?title=MN_CSW_Permit_Section_25_Definitions#25.23 Permittees] must select, install, and maintain the BMPs identified in the [https://stormwater.pca.state.mn.us/index.php?title=MN_CSW_Permit_Section_25_Definitions#25.33 SWPPP] and in this permit in an appropriate and functional manner and in accordance with relevant manufacturer specifications and accepted engineering practices.</big>

Revision as of 17:59, 31 July 2018

This site is currently undergoing revision. For more information, open this link.
This section of the manual is being developed

SECTION 7 BMP SELECTION AND INSTALLATION

7.1

BMP Selection and Installation.

7.2

Permittees must select, install, and maintain the BMPs identified in the SWPPP and in this permit in an appropriate and functional manner and in accordance with relevant manufacturer specifications and accepted engineering practices.