Difference between revisions of "Other water quality devices - installation and maintenance recommendations"
m |
m |
||
| Line 15: | Line 15: | ||
<td>SNOUT</td> | <td>SNOUT</td> | ||
<td></td> | <td></td> | ||
| + | <td>Monthly for the first year, then annual inspection of anti-siphon vent and access hatch. If Bio-Skirt is used, check monthly [http://www.bmpinc.com/sites/default/files/special_files/Maintenance%20Considerations%20for%20SNOUT%20Stormwater%20Quality%20Systems%2010.pdf]</td> | ||
| + | <td>[http://www.bmpinc.com/sites/default/files/special_files/Maintenance%20Considerations%20for%20SNOUT%20Stormwater%20Quality%20Systems%2010.pdf Maintenance considerations]</td> | ||
<td></td> | <td></td> | ||
| − | <td> | + | <td>Sediment removed from sump when it is half full. Trash and floatables removed when 6 in accumulates on surface. If Bio-Skirt is used, replace immediately after oil spill or when 2/3 of boom is submerged (nearly saturated) [http://www.bmpinc.com/sites/default/files/special_files/Maintenance%20Considerations%20for%20SNOUT%20Stormwater%20Quality%20Systems%2010.pdf]</td> |
| − | |||
| − | |||
<td></td> | <td></td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Eliminator</td> | <td>Eliminator</td> | ||
| + | <td>Installs in minutes. Installation instructions [https://www.kleanstream.com/wp-content/uploads/2017/12/Instructions-new.pdf here]. [https://www.kleanstream.com/wp-content/uploads/2017/12/Product_Specs.pdf]</td> | ||
| + | <td>After major storm events</td> | ||
<td></td> | <td></td> | ||
<td></td> | <td></td> | ||
| − | <td> | + | <td>Catch basin, hood, and filter (if used) cleaned annually [https://www.kleanstream.com/products/]</td> |
| − | |||
| − | |||
<td></td> | <td></td> | ||
</tr> | </tr> | ||
| Line 33: | Line 33: | ||
<td>Floatable boom</td> | <td>Floatable boom</td> | ||
<td></td> | <td></td> | ||
| + | <td>Monthly and after major storm events</td> | ||
<td></td> | <td></td> | ||
<td></td> | <td></td> | ||
| − | <td> | + | <td>Frequent inspection and floatables removal.</td> |
| − | |||
<td></td> | <td></td> | ||
</tr> | </tr> | ||
| Line 42: | Line 42: | ||
<td>Hood</td> | <td>Hood</td> | ||
<td></td> | <td></td> | ||
| + | <td>Monthly and after major storm events</td> | ||
<td></td> | <td></td> | ||
<td></td> | <td></td> | ||
| − | <td> | + | <td>Frequent inspection and floatables removal.</td> |
| − | |||
<td></td> | <td></td> | ||
</tr> | </tr> | ||
</table> | </table> | ||
Revision as of 14:13, 4 June 2019
Other water quality devices - installation and maintenance recommendations
Link to this table
| Device | Installation notes | Frequency of inspections | Maintenance checklist (link) | Permitted on private land/ Maintenance agreement recommended | Practices for minimizing sediment and trash buildup | Cost considerations (equipment needed and man hours) |
|---|---|---|---|---|---|---|
| SNOUT | Monthly for the first year, then annual inspection of anti-siphon vent and access hatch. If Bio-Skirt is used, check monthly [1] | Maintenance considerations | Sediment removed from sump when it is half full. Trash and floatables removed when 6 in accumulates on surface. If Bio-Skirt is used, replace immediately after oil spill or when 2/3 of boom is submerged (nearly saturated) [2] | |||
| Eliminator | Installs in minutes. Installation instructions here. [3] | After major storm events | Catch basin, hood, and filter (if used) cleaned annually [4] | |||
| Floatable boom | Monthly and after major storm events | Frequent inspection and floatables removal. | ||||
| Hood | Monthly and after major storm events | Frequent inspection and floatables removal. |