Difference between revisions of "Other water quality devices - installation and maintenance recommendations"
m |
m |
||
| Line 49: | Line 49: | ||
</tr> | </tr> | ||
</table> | </table> | ||
| + | |||
| + | <noinclude> | ||
| + | [[Category:Pretreatment table]] | ||
| + | </noinclude> | ||
Revision as of 17:58, 13 April 2020
Other water quality devices - installation and maintenance recommendations
Link to this table
| Device | Installation notes | Frequency of inspections | Maintenance checklist (link) | Permitted on private land/ Maintenance agreement recommended | Practices for minimizing sediment and trash buildup | Cost considerations (equipment needed and man hours) |
|---|---|---|---|---|---|---|
| SNOUT | Monthly for the first year, then annual inspection of anti-siphon vent and access hatch. If Bio-Skirt is used, check monthly [1] | Maintenance considerations | Sediment removed from sump when it is half full. Trash and floatables removed when 6 in accumulates on surface. If Bio-Skirt is used, replace immediately after oil spill or when 2/3 of boom is submerged (nearly saturated) [2] | |||
| Eliminator | Installs in minutes. Installation instructions here. [3] | After major storm events | Catch basin, hood, and filter (if used) cleaned annually [4] | |||
| Floatable boom | Monthly and after major storm events | Frequent inspection and floatables removal. | ||||
| Hood | Monthly and after major storm events | Frequent inspection and floatables removal. |