m
m
Line 28: Line 28:
 
**[https://www.pca.state.mn.us/water/statewide-chloride-resources Technical reports and Chloride TMDLs]
 
**[https://www.pca.state.mn.us/water/statewide-chloride-resources Technical reports and Chloride TMDLs]
 
**[https://www.pca.state.mn.us/water/water-permit-holders-and-chloride Chloride and NPDES Permits]  
 
**[https://www.pca.state.mn.us/water/water-permit-holders-and-chloride Chloride and NPDES Permits]  
*[[Guidance for calculator to estimate chloride loading to groundwater from infiltration]]
 
 
*[[References for Smart Salting (S2) and road salt winter maintenance]]
 
*[[References for Smart Salting (S2) and road salt winter maintenance]]
 
*Chloride and groundwater
 
*Chloride and groundwater

Revision as of 13:02, 16 December 2020

image of salting truck
check it out image
For information on model snow and ice policies and examples, click on this link.

MPCA recommends a low-salt diet for Minnesota waters. Doctors tell us to stick to a low-salt diet. Our lakes and streams should follow the same advice. When winter comes and snow and ice build up on Minnesota roads, parking lots, and sidewalks, one of the most common reactions is to apply salt, which contains chloride, a water pollutant.

Salt pollutes. When snow and ice melts, the salt goes with it, washing into our lakes, streams, wetlands, and groundwater. It takes only one teaspoon of road salt to permanently pollute 5 gallons of water. Once in the water, there is no way to remove the chloride, and at high concentrations, chloride can harm fish and plant life. Less is more when it comes to applying road salt.

The following table of contents summarizes pages and sections in the manual that address road salt, Smart Salting (S2), and winter maintenance.