Saturated hydraulic conductivity values used in long-term continuous simulation modeling analysis Revision as of 21:11, 2 August 2022 by Mtrojan (talk | contribs)(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff) Saturated hydraulic conductivity values used in long-term continuous simulation modeling analysis

Saturated hydraulic conductivity values used in long-term continuous simulation modeling analysis
Link to this table.

Hydrologic soil group	Representative soil texture	Saturated hydraulic conductivity (in/hr)
		Compacted	Average1	Loosened2
A	sandy loam	0.50	0.90	2.20
B	loam	0.15	0.205	0.24
C	sandy clay loam	0.11	0.14	0.30
D	silty clay	N/A	0.06	N/A

¹ The Ksat values termed “average” for the modeling analysis represent the mean K_sat values for each soil texture based on a national database of over 1,000 observed saturated hydraulic conductivities (Rawls, 1998).
²The Ksat values termed “compacted” and “loosened” for the modeling analysis represent the geometric mean Ksat values for soils within the national database developed by Rawls that have bulk densities higher and lower than the NRCS recommended value for the given soil texture class, respectively (Rawls, 1998).