Sector-Specific Benchmark Values and Effluent Limitations: Sector D - Asphalt Paving and Roofing Materials and Lubricant Manufacturing. Discharges may be subject to requirements for more than one sector or subsector.
Link to this table

Subsector Parameter Benchmark Values Effluent Limits
D1 Asphalt Paving and Roofing Materials Solids, Total Suspended (TSS) 100 mg/L 1 Effluent Monitoring Not Required
D2 Discharges from Production of Asphalt Emulsions Areas Solids, Total Suspended (TSS) Benchmark Monitoring Not Required 23 mg/L daily maximum
15 mg/L calendar month average
pH Benchmark Monitoring Not Required 6.0 SU, instantaneous minimum 9.0 SU, instantaneous maximum
Oil & Grease, Total Benchmark Monitoring Not Required 15 mg/L daily maximum
10 mg/L calendar month average
D3 Miscellaneous Products of Petroleum and Coal Solids, Total Suspended (TSS) 100 mg/L 1 Effluent Monitoring Not Required

1If the Permittee is required to comply with Appendix A, part F.1, the benchmark value for Solids, Total Suspended (TSS) is 65 mg/L, instead of 100 mg/L.

This page was last edited on 17 August 2013, at 14:05.