(Created page with "<center><font size=3>'''Step 4 Calibration Chart for auger or conveyor systems'''</font size><br> Link to this [[Step 4 Calibration Chart for auger or conveyor systems|table]...") |
m |
||
Line 1: | Line 1: | ||
− | + | <font size=3>'''Step 4 Calibration Chart for auger or conveyor systems'''</font size><br> | |
− | + | Link to this [[Step 4 Calibration Chart for auger or conveyor systems|table]] | |
− | Link to this [[Step 4 Calibration Chart for auger or conveyor systems|table]] | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
<table class="sortable"> | <table class="sortable"> | ||
+ | <tr> | ||
+ | <td colspan=6>Date: August 8, 2015</td> | ||
+ | <td colspan=6>Spreader #: A4219</td> | ||
+ | <td colspan=6>Material: Rock salt</td> | ||
+ | </tr> | ||
<tr> | <tr> | ||
<th>Setting</th> | <th>Setting</th> |
Step 4 Calibration Chart for auger or conveyor systems
Link to this table
Date: August 8, 2015 | Spreader #: A4219 | Material: Rock salt | |||||||||||||||
Setting | Pounds per minute | 5 mph (X12) | 10 mph (X6) | 15 mph (X4) | 20 mph (X3) | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 10 | * 120 | 60 | 40 | 30 | ||||||||||||
**1.9 | 1.0 | 0.6 | 0.5 | ||||||||||||||
2 | 22 | 264 | 132 | 88 | 66 | ||||||||||||
4.2 | 2.1 | 1.4 | 1.0 | ||||||||||||||
3 | 34 | 408 | 204 | 136 | 102 | ||||||||||||
6.5 | 3.2 | 2.2 | 1.6 |
*top half of each row = lbs/lane mile. To get this number, multiply lbs/min by the factor shown for each speed
**bottom half of each row = lbs/1000 sq ft. To find this, divide the number in the top half by 63