m
m
(31 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[File:Picture of a wet pond 2.jpg|right|thumb|400 px|alt=Photo 12.1: Photo of a wet detention pond|Photo of a wet detention pond]]
+
[[File:Picture of a wet pond 2.jpg|right|thumb|300 px|alt=This photo shows a wet detention pond|<font size=3>Photo of a wet detention pond</font size>]]
<!--[[File:pond6.png|right|300 px|alt=fact sheet 1|Picture of a wet detention pond]]
+
[[File:Picture of a dry pond 1.jpg|right|thumb|300 px|alt=This photo illustrates an example of a dry pond|<font size=3>Photo showing an example of a dry pond</font size>]]
[[File:Plan and profile view of a wet pond.jpg|right|300 px|alt=fact sheet 1|Picture of a wet detention pond]]
 
[[File:pond3.jpg|right|300 px|alt=fact sheet 1|Picture of a wet detention pond]]-->
 
  
Generally speaking, the term “stormwater pond” may refer to any constructed basin that is built for the purpose of capturing and storing stormwater runoff, either temporarily or for an extended period of time, in order to prevent or mitigate downstream water quantity or quality impacts. Several distinct structure types (wet ponds, dry ponds, etc.) are included in this general category, and they are discussed in more detail below.
+
Generally speaking, the term “stormwater pond” may refer to any constructed basin that is built for the purpose of capturing and storing [[Glossary#S|stormwater]] [[Glossary#R|runoff]], either temporarily or for an extended period of time, in order to prevent or mitigate downstream water quantity or quality impacts. Several distinct structure types (wet ponds, dry ponds, etc.) are included in this general category, and they are discussed in more detail in the [[Types of stormwater ponds|Manual]].
  
'''The sections in this chapter may be viewed as a [[Stormwater ponds combined|single page]].'''
+
'''The sections in this chapter may be viewed as a [[Stormwater ponds combined|single page]].''' Note: Due to an unresolved bug, when viewing a formula in a combined article, the math markup (used for equations) is displayed. Please ignore the markup. Thanks.
 +
 
 +
<font size=3><u>'''Stormwater ponds articles'''</u></font size>
 +
 
 +
*[[Overview for stormwater ponds]]
 +
*[[Types of stormwater ponds]]
 +
*[[Design criteria for stormwater ponds]]
 +
*[[Design considerations for constructed stormwater ponds used for harvest and irrigation use/reuse]]
 +
*[[Construction specifications for stormwater ponds]]
 +
<!--[[Construction observations for stormwater ponds]]-->
 +
*[[Assessing the performance of stormwater ponds]]
 +
*[[Operation and maintenance of stormwater ponds]]
 +
*[[Cost-benefit considerations for stormwater ponds]]
 +
*[[Calculating credits for stormwater ponds]]
 +
*[[Occurrence and mechanisms of constructed stormwater ponds that do not effectively retain phosphorus]]
 +
*[[Assessing total suspended sediment and total phosphorus removal efficiency of permittee owned/operated constructed stormwater ponds]]
 +
*[[Stormwater wet pond fact sheet]]
 +
<!--[[Additional considerations for stormwater ponds]]
 +
*[[Links for stormwater ponds]]
 +
*[[External resources for stormwater ponds]]-->
 +
*[[References for stormwater ponds]]
 +
<!--*[[Supporting material for stormwater ponds]]-->
 +
*[[Requirements, recommendations and information for using stormwater pond as a BMP in the MIDS calculator]]
 +
 
 +
<!--A one page [[Fact sheets for stormwater ponds|fact sheet]] for stormwater ponds provides overview information, a short summary of design, construction and maintenance considerations, and information on stormwater volume and pollutant removal.-->
  
#[[Overview for stormwater ponds]]
 
#[[Types of stormwater ponds]]
 
#[[Design specifications for stormwater ponds]]
 
#[[Construction specifications for stormwater ponds]]
 
#[[Operation and maintenance of stormwater ponds]]
 
#[[Assessing the performance of stormwater ponds]]
 
#[[Training, certification and accreditation for stormwater ponds]]
 
#[[Calculating credits for stormwater ponds]]
 
#[[Cost-benefit considerations for stormwater ponds]]
 
#[[Additional considerations for stormwater ponds]]
 
#[[Links for stormwater ponds]]
 
#[[References for stormwater ponds]]
 
#[[Fact sheets for stormwater ponds]]
 
  
 
<!--[[File:pond.png|thumb|alt=Puzzle globe|Picture of a wet detention pond]]
 
<!--[[File:pond.png|thumb|alt=Puzzle globe|Picture of a wet detention pond]]
Line 42: Line 51:
  
 
==Overview==
 
==Overview==
This section provides an overview of stormwater ponds. It includes a discussion of permit applicability, function within the treatment train, cold climate and retrofit suitability, and role in water quality and quantity treatment.
+
This section provides an overview of stormwater ponds. It includes a discussion of permit applicability, function within the treatment train, cold climate and retrofit suitability, and role in water quality and quantity treatment.
  
 
===Function within stormwater treatment train===
 
===Function within stormwater treatment train===
Line 108: Line 117:
 
<p>The longer the runoff remains in the pond, the more settling (and associated pollutant removal) and other treatment can occur, and after the particulates reach the bottom of the pond, the permanent pool protects them from resuspension when additional runoff enters the basin. For these reasons, because they lack the crucial permanent pool, dry extended detention ponds are not considered an acceptable option for meeting water quality treatment goals; however, they may be appropriate to meet water quantity criteria (Vcp, Vp10, Vp100; see [[Uniform sizing criteria]]). It should again be noted that the only type of pond complying with the MPCA CGP is the wet extended detention pond (or wet sedimentation basin) constructed according to the minimum standards outlined in the permit.</p>
 
<p>The longer the runoff remains in the pond, the more settling (and associated pollutant removal) and other treatment can occur, and after the particulates reach the bottom of the pond, the permanent pool protects them from resuspension when additional runoff enters the basin. For these reasons, because they lack the crucial permanent pool, dry extended detention ponds are not considered an acceptable option for meeting water quality treatment goals; however, they may be appropriate to meet water quantity criteria (Vcp, Vp10, Vp100; see [[Uniform sizing criteria]]). It should again be noted that the only type of pond complying with the MPCA CGP is the wet extended detention pond (or wet sedimentation basin) constructed according to the minimum standards outlined in the permit.</p>
 
<p>The long detention or retention time associated with stormwater ponds can be problematic in coldwater fisheries due to the potential increase in water temperature. In these situations, detention times should be limited to a maximum of 12 hours or other treatment alternatives (e.g., infiltration) should be explored.</p>
 
<p>The long detention or retention time associated with stormwater ponds can be problematic in coldwater fisheries due to the potential increase in water temperature. In these situations, detention times should be limited to a maximum of 12 hours or other treatment alternatives (e.g., infiltration) should be explored.</p>
<p>Removal efficiencies for key pollutants for wet extended detention ponds are provided in Table 12.8.2. Typical effluent concentrations for selected water quality parameters are provided in Table 12.8.3.</p>
+
<p>Removal efficiencies for key pollutants for wet extended detention ponds are provided in Table 12.8.2. Typical effluent concentrations for selected water quality parameters are provided in Table 12.8.3.</p>
  
 
<br>
 
<br>
Line 195: Line 204:
  
 
==Design==
 
==Design==
This section describes information on design of stormwater ponds. CADD drawings can be found [[Ponds and wetlands|at this link]]
+
This section describes information on design of stormwater ponds. CADD drawings can be found [[Ponds and wetlands|at this link]]
  
 
===Physical feasibility initial check===
 
===Physical feasibility initial check===
Line 503: Line 512:
  
 
:'''Step 8:''' Size and design outlet structures
 
:'''Step 8:''' Size and design outlet structures
The following outlet stages should be included in the pond design. It is possible to design one device to meet all stages. Equations included in this step are based on certain assumptions about which types of outlet structures will be used to control the various stages. If the designer chooses to use different structure types, the specific equations used to determine stage-discharge relationships will change, but the general approach will remain the same. For this discussion, an emergency drain is a drawdown pipe sized to drain the pond within 24 hours to allow access for riser repairs and sediment removal, or to lower the permanent pool in late fall (to provide additional storage during frozen conditions), while a water quality (low flow) outlet is an outlet (typically an orifice) designed to release Vwq with an average detention time of 12 hours. After designing the orifice, a check should be made to verify that the release rate is no greater than 5.66 cfs/acre of pond surface area. (Calculation steps adapted from Vermont Stormwater Management Manual.)
+
The following outlet stages should be included in the pond design. It is possible to design one device to meet all stages. Equations included in this step are based on certain assumptions about which types of outlet structures will be used to control the various stages. If the designer chooses to use different structure types, the specific equations used to determine stage-discharge relationships will change, but the general approach will remain the same. For this discussion, an emergency drain is a drawdown pipe sized to drain the pond within 24 hours to allow access for riser repairs and sediment removal, or to lower the permanent pool in late fall (to provide additional storage during frozen conditions), while a water quality (low flow) outlet is an outlet (typically an orifice) designed to release Vwq with an average detention time of 12 hours. After designing the orifice, a check should be made to verify that the release rate is no greater than 5.66 cfs/acre of pond surface area. (Calculation steps adapted from Vermont Stormwater Management Manual.)
 
<p>The average release rate for Vwq is computed as:
 
<p>The average release rate for Vwq is computed as:
  
Line 510: Line 519:
 
<br>
 
<br>
  
From the stage-storage table, find the elevation associated with V<sub>wq</sub>. Calculate the approximate average head on the water quality outlet as:
+
From the stage-storage table, find the elevation associated with V<sub>wq</sub>. Calculate the approximate average head on the water quality outlet as:
  
 
<br>
 
<br>
Line 590: Line 599:
 
Maintenance access to the pond, forebay, and inlet and outlet structures is '''Required'''. The access routes should be designed with a minimum 10’ width and maximum 15% slope.
 
Maintenance access to the pond, forebay, and inlet and outlet structures is '''Required'''. The access routes should be designed with a minimum 10’ width and maximum 15% slope.
 
<p>Safety features such as obstructive planting that make access difficult, signs warning against fishing and swimming, fencing, and grates over outlet structures should be included as appropriate. Aesthetic enhancements such as trails or benches can also be included.</p>
 
<p>Safety features such as obstructive planting that make access difficult, signs warning against fishing and swimming, fencing, and grates over outlet structures should be included as appropriate. Aesthetic enhancements such as trails or benches can also be included.</p>
<p>If an outlet structure is greater than five feet deep, it is '''Required''' that OSHA health and safety guidelines be followed for safe construction and access practices. Additional information on safety for construction sites is available from [http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10930 OSHA]. OSHA has prepared a flow chart which will help site owners and operators determine if the site safety plan must address confined space procedures.</p>
+
<p>If an outlet structure is greater than five feet deep, it is '''Required''' that OSHA health and safety guidelines be followed for safe construction and access practices. Additional information on safety for construction sites is available from [http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=10930 OSHA]. OSHA has prepared a flow chart which will help site owners and operators determine if the site safety plan must address confined space procedures.</p>
  
 
:'''Step 13:''' Check expected pond performance against regulatory requirements.
 
:'''Step 13:''' Check expected pond performance against regulatory requirements.
Line 788: Line 797:
 
*Winer, R. National Pollutant Removal Performance Database, 2000.-->
 
*Winer, R. National Pollutant Removal Performance Database, 2000.-->
  
[[category:BMP]]
+
<noinclude>
 +
[[Category:Ponds and wetlands]]
 +
</noinclude>
 +
<noinclude>[[Category:BMP]]</noinclude>

Revision as of 19:10, 15 August 2022

This photo shows a wet detention pond
Photo of a wet detention pond
This photo illustrates an example of a dry pond
Photo showing an example of a dry pond

Generally speaking, the term “stormwater pond” may refer to any constructed basin that is built for the purpose of capturing and storing stormwater runoff, either temporarily or for an extended period of time, in order to prevent or mitigate downstream water quantity or quality impacts. Several distinct structure types (wet ponds, dry ponds, etc.) are included in this general category, and they are discussed in more detail in the Manual.

The sections in this chapter may be viewed as a single page. Note: Due to an unresolved bug, when viewing a formula in a combined article, the math markup (used for equations) is displayed. Please ignore the markup. Thanks.

Stormwater ponds articles